ipod touch wizard: free ipod touch hacks, news and tricks: December 2009

Thursday, December 31, 2009

Re: [appigo-todo] Todo Sync Issue with Outlook

0 comments 4:05 PM Posted by osama algendy

sandpit147,

Thank you for your post.

We have identify a bug that could be causing the faulty sync of your tasks.

"System.Runtime.

InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()"

We have forwarded this information to our development team and they should be coming up with a fix in a future release of Appigo Sync BETA for Outlook.

The Appigo Team
--
Appigo Support
support@appigo.com

Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

Follow the latest from Appigo on Facebook:
http://www.tinyurl.com/appigo-fb

Follow the latest from Appigo on Twitter:
http://twitter.com/appigo

Participate with Appigo and our community using the following Google groups:
http://groups.google.com/group/appigo-todo/
http://groups.google.com/group/appigo-notebook/
http://groups.google.com/group/appigo-accufuel/

On Mon, Dec 28, 2009 at 10:16 PM, sandpit147 <sandpit147@gmail.com> wrote:

Hi,

I've just purchased todo and setup windows appigo sync beta as per the
instructions on the website. I have also downloaded and installed the
2007 Microsoft Office System Update: Redistributable Primary Interop
Assemblies patch. I can't get the sync function to work in both
directions however:

1. New tasks created in outlook 2007 sync to Todo ok - Working fine
2. Existing outlook tasks are not being sync'd - Not Working
3. Any changes made within Todo (new or amended/completed tasks) are
not being sync'd - Not Working

Log file contents follow:

29/12/2009 9:37:50 AM,No authorized devices found
29/12/2009 9:37:55 AM,Desktop Service was created
29/12/2009 9:37:56 AM,Dynamically allocated port : 1182
29/12/2009 9:38:04 AM,Registering service with Bonjour
29/12/2009 9:38:05 AM,** Outlook Sync started **
29/12/2009 9:38:05 AM,Syncing folders done: 1 Outlook folders, 0 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:38:10 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:38:10 AM,Attempting to reconnect to outlook
29/12/2009 9:38:10 AM,Re-connect was successful
29/12/2009 9:38:37 AM,Device not yet authorized
29/12/2009 9:38:40 AM,Device not yet authorized
29/12/2009 9:38:43 AM,Device not yet authorized
29/12/2009 9:39:26 AM,getCalendars returned 1 lists
29/12/2009 9:39:27 AM,getContexts returned 0 contexts
29/12/2009 9:39:27 AM,getTasks returned 0 tasks
29/12/2009 9:39:27 AM,getTasks (completed) returned 0 tasks
29/12/2009 9:39:29 AM,syncSessionDone called
29/12/2009 9:39:29 AM,** Outlook Sync started **
29/12/2009 9:39:29 AM,Adding folder to outlook: Work
29/12/2009 9:39:29 AM,Adding folder to outlook: Home
29/12/2009 9:39:29 AM,Syncing folders done: 1 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:39:29 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:39:29 AM,Attempting to reconnect to outlook
29/12/2009 9:39:29 AM,Re-connect was successful
29/12/2009 9:40:00 AM,getCalendars returned 3 lists
29/12/2009 9:40:00 AM,syncSessionDone called
29/12/2009 9:40:00 AM,** Outlook Sync started **
29/12/2009 9:40:00 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:40:01 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:40:01 AM,Attempting to reconnect to outlook
29/12/2009 9:40:01 AM,Re-connect was successful
29/12/2009 9:41:50 AM,getCalendars returned 3 lists
29/12/2009 9:41:51 AM,syncSessionDone called
29/12/2009 9:41:51 AM,** Outlook Sync started **
29/12/2009 9:41:51 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:41:51 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:41:51 AM,Attempting to reconnect to outlook
29/12/2009 9:41:51 AM,Re-connect was successful
29/12/2009 9:42:17 AM,** Outlook Sync started **
29/12/2009 9:42:17 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:42:17 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:42:17 AM,Attempting to reconnect to outlook
29/12/2009 9:42:17 AM,Re-connect was successful
29/12/2009 9:42:41 AM,getCalendars returned 3 lists
29/12/2009 9:42:41 AM,syncSessionDone called
29/12/2009 9:42:41 AM,** Outlook Sync started **
29/12/2009 9:42:41 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:42:41 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:42:41 AM,Attempting to reconnect to outlook
29/12/2009 9:42:41 AM,Re-connect was successful
29/12/2009 9:42:48 AM,** Outlook Sync started **
29/12/2009 9:42:48 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:42:48 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:42:48 AM,Attempting to reconnect to outlook
29/12/2009 9:42:48 AM,Re-connect was successful
29/12/2009 9:42:55 AM,** Outlook Sync started **
29/12/2009 9:42:55 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:42:55 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:42:55 AM,Attempting to reconnect to outlook
29/12/2009 9:42:55 AM,Re-connect was successful
29/12/2009 9:42:58 AM,Desktop Service was created
29/12/2009 9:42:58 AM,Dynamically allocated port : 1225
29/12/2009 9:42:58 AM,Registering service with Bonjour
29/12/2009 9:42:58 AM,** Outlook Sync started **
29/12/2009 9:42:58 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:42:58 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:42:58 AM,Attempting to reconnect to outlook
29/12/2009 9:42:58 AM,Re-connect was successful
29/12/2009 9:43:00 AM,** Outlook Sync started **
29/12/2009 9:43:00 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:43:00 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:43:00 AM,Attempting to reconnect to outlook
29/12/2009 9:43:00 AM,Re-connect was successful
29/12/2009 9:45:22 AM,getCalendars returned 3 lists
29/12/2009 9:45:23 AM,syncSessionDone called
29/12/2009 9:45:23 AM,** Outlook Sync started **
29/12/2009 9:45:23 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:45:23 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:45:23 AM,Attempting to reconnect to outlook
29/12/2009 9:45:23 AM,Re-connect was successful
29/12/2009 9:47:00 AM,getCalendars returned 3 lists
29/12/2009 9:47:00 AM,getContexts returned 0 contexts
29/12/2009 9:47:00 AM,getTasks returned 0 tasks
29/12/2009 9:47:00 AM,getTasks (completed) returned 2 tasks
29/12/2009 9:47:00 AM,syncSessionDone called
29/12/2009 9:47:00 AM,** Outlook Sync started **
29/12/2009 9:47:00 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:01 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:01 AM,Attempting to reconnect to outlook
29/12/2009 9:47:01 AM,Re-connect was successful
29/12/2009 9:47:08 AM,** Outlook Sync started **
29/12/2009 9:47:08 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:08 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:08 AM,Attempting to reconnect to outlook
29/12/2009 9:47:08 AM,Re-connect was successful
29/12/2009 9:47:08 AM,** Outlook Sync started **
29/12/2009 9:47:08 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:08 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:08 AM,Attempting to reconnect to outlook
29/12/2009 9:47:09 AM,Re-connect was successful
29/12/2009 9:47:09 AM,** Outlook Sync started **
29/12/2009 9:47:09 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:09 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:09 AM,Attempting to reconnect to outlook
29/12/2009 9:47:09 AM,Re-connect was successful
29/12/2009 9:47:09 AM,** Outlook Sync started **
29/12/2009 9:47:09 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:09 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:09 AM,Attempting to reconnect to outlook
29/12/2009 9:47:09 AM,Re-connect was successful
29/12/2009 9:47:09 AM,** Outlook Sync started **
29/12/2009 9:47:09 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:09 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:09 AM,Attempting to reconnect to outlook
29/12/2009 9:47:09 AM,Re-connect was successful
29/12/2009 9:47:09 AM,** Outlook Sync started **
29/12/2009 9:47:09 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:47:09 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:47:09 AM,Attempting to reconnect to outlook
29/12/2009 9:47:09 AM,Re-connect was successful
29/12/2009 9:48:54 AM,** Outlook Sync started **
29/12/2009 9:48:54 AM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 9:48:54 AM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:48:54 AM,Attempting to reconnect to outlook
29/12/2009 9:48:54 AM,Re-connect was successful
29/12/2009 9:49:01 AM,** Outlook Sync started **
29/12/2009 9:49:06 AM,System.Runtime.InteropServices.COMException
(0x800706BA): The RPC server is unavailable. (Exception from HRESULT:
0x800706BA)
at Microsoft.Office.Interop.Outlook.MAPIFolder.get_EntryID()
at Appigo_Sync.OutlookSyncService.syncFolders()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:49:06 AM,Attempting to reconnect to outlook
29/12/2009 9:49:06 AM,Re-connect was successful
29/12/2009 9:49:34 AM,getCalendars returned 3 lists
29/12/2009 9:49:34 AM,syncSessionDone called
29/12/2009 9:49:34 AM,** Outlook Sync started **
29/12/2009 9:49:43 AM,System.Runtime.InteropServices.COMException
(0x800706BA): The RPC server is unavailable. (Exception from HRESULT:
0x800706BA)
at Microsoft.Office.Interop.Outlook.MAPIFolder.get_EntryID()
at Appigo_Sync.OutlookSyncService.syncFolders()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 9:49:43 AM,Attempting to reconnect to outlook
29/12/2009 9:49:43 AM,Re-connect was successful
29/12/2009 1:54:25 PM,Desktop Service was created
29/12/2009 1:54:26 PM,Dynamically allocated port : 1137
29/12/2009 1:54:26 PM,Registering service with Bonjour
29/12/2009 1:54:26 PM,** Outlook Sync started **
29/12/2009 1:54:26 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 1:54:54 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 1:54:54 PM,Attempting to reconnect to outlook
29/12/2009 1:54:55 PM,Re-connect was successful
29/12/2009 1:55:22 PM,** Outlook Sync started **
29/12/2009 1:55:26 PM,System.Runtime.InteropServices.COMException
(0x800706BA): The RPC server is unavailable. (Exception from HRESULT:
0x800706BA)
at Microsoft.Office.Interop.Outlook.MAPIFolder.get_EntryID()
at Appigo_Sync.OutlookSyncService.syncFolders()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 1:55:26 PM,Attempting to reconnect to outlook
29/12/2009 1:55:26 PM,Re-connect was successful
29/12/2009 1:55:34 PM,getCalendars returned 3 lists
29/12/2009 1:55:34 PM,getContexts returned 0 contexts
29/12/2009 1:55:35 PM,getTasks returned 0 tasks
29/12/2009 1:55:35 PM,getTasks (completed) returned 2 tasks
29/12/2009 1:55:35 PM,syncSessionDone called
29/12/2009 1:55:35 PM,** Outlook Sync started **
29/12/2009 1:55:35 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 1:55:35 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 1:55:35 PM,Attempting to reconnect to outlook
29/12/2009 1:55:35 PM,Re-connect was successful
29/12/2009 3:08:28 PM,** Outlook Sync started **
29/12/2009 3:08:28 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:28 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:28 PM,Attempting to reconnect to outlook
29/12/2009 3:08:28 PM,Re-connect was successful
29/12/2009 3:08:30 PM,** Outlook Sync started **
29/12/2009 3:08:30 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:30 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:30 PM,Attempting to reconnect to outlook
29/12/2009 3:08:30 PM,Re-connect was successful
29/12/2009 3:08:30 PM,** Outlook Sync started **
29/12/2009 3:08:30 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:30 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:30 PM,Attempting to reconnect to outlook
29/12/2009 3:08:30 PM,Re-connect was successful
29/12/2009 3:08:30 PM,** Outlook Sync started **
29/12/2009 3:08:30 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:31 PM,Attempting to reconnect to outlook
29/12/2009 3:08:31 PM,Re-connect was successful
29/12/2009 3:08:31 PM,** Outlook Sync started **
29/12/2009 3:08:31 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:31 PM,Attempting to reconnect to outlook
29/12/2009 3:08:31 PM,Re-connect was successful
29/12/2009 3:08:31 PM,** Outlook Sync started **
29/12/2009 3:08:31 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:31 PM,Attempting to reconnect to outlook
29/12/2009 3:08:31 PM,Re-connect was successful
29/12/2009 3:08:31 PM,** Outlook Sync started **
29/12/2009 3:08:31 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:31 PM,Attempting to reconnect to outlook
29/12/2009 3:08:31 PM,Re-connect was successful
29/12/2009 3:08:31 PM,** Outlook Sync started **
29/12/2009 3:08:31 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:31 PM,Attempting to reconnect to outlook
29/12/2009 3:08:31 PM,Re-connect was successful
29/12/2009 3:08:31 PM,** Outlook Sync started **
29/12/2009 3:08:31 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:31 PM,Attempting to reconnect to outlook
29/12/2009 3:08:32 PM,Re-connect was successful
29/12/2009 3:08:32 PM,** Outlook Sync started **
29/12/2009 3:08:32 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:32 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:32 PM,Attempting to reconnect to outlook
29/12/2009 3:08:32 PM,Re-connect was successful
29/12/2009 3:08:32 PM,** Outlook Sync started **
29/12/2009 3:08:32 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:32 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:32 PM,Attempting to reconnect to outlook
29/12/2009 3:08:32 PM,Re-connect was successful
29/12/2009 3:08:32 PM,** Outlook Sync started **
29/12/2009 3:08:32 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:32 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:32 PM,Attempting to reconnect to outlook
29/12/2009 3:08:32 PM,Re-connect was successful
29/12/2009 3:08:32 PM,** Outlook Sync started **
29/12/2009 3:08:32 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:32 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:32 PM,Attempting to reconnect to outlook
29/12/2009 3:08:32 PM,Re-connect was successful
29/12/2009 3:08:33 PM,** Outlook Sync started **
29/12/2009 3:08:33 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:33 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:33 PM,Attempting to reconnect to outlook
29/12/2009 3:08:33 PM,Re-connect was successful
29/12/2009 3:08:33 PM,** Outlook Sync started **
29/12/2009 3:08:33 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:33 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:33 PM,Attempting to reconnect to outlook
29/12/2009 3:08:33 PM,Re-connect was successful
29/12/2009 3:08:33 PM,** Outlook Sync started **
29/12/2009 3:08:33 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:33 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:33 PM,Attempting to reconnect to outlook
29/12/2009 3:08:33 PM,Re-connect was successful
29/12/2009 3:08:33 PM,** Outlook Sync started **
29/12/2009 3:08:33 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:33 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:33 PM,Attempting to reconnect to outlook
29/12/2009 3:08:33 PM,Re-connect was successful
29/12/2009 3:08:33 PM,** Outlook Sync started **
29/12/2009 3:08:33 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:33 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:33 PM,Attempting to reconnect to outlook
29/12/2009 3:08:33 PM,Re-connect was successful
29/12/2009 3:08:34 PM,** Outlook Sync started **
29/12/2009 3:08:34 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:34 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:34 PM,Attempting to reconnect to outlook
29/12/2009 3:08:34 PM,Re-connect was successful
29/12/2009 3:08:34 PM,** Outlook Sync started **
29/12/2009 3:08:34 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:34 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:34 PM,Attempting to reconnect to outlook
29/12/2009 3:08:34 PM,Re-connect was successful
29/12/2009 3:08:34 PM,** Outlook Sync started **
29/12/2009 3:08:34 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:34 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:34 PM,Attempting to reconnect to outlook
29/12/2009 3:08:34 PM,Re-connect was successful
29/12/2009 3:08:34 PM,** Outlook Sync started **
29/12/2009 3:08:34 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:34 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:34 PM,Attempting to reconnect to outlook
29/12/2009 3:08:34 PM,Re-connect was successful
29/12/2009 3:08:34 PM,** Outlook Sync started **
29/12/2009 3:08:34 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:34 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:34 PM,Attempting to reconnect to outlook
29/12/2009 3:08:34 PM,Re-connect was successful
29/12/2009 3:08:35 PM,** Outlook Sync started **
29/12/2009 3:08:35 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:35 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:35 PM,Attempting to reconnect to outlook
29/12/2009 3:08:35 PM,Re-connect was successful
29/12/2009 3:08:44 PM,Desktop Service was created
29/12/2009 3:08:44 PM,Dynamically allocated port : 1137
29/12/2009 3:08:44 PM,Registering service with Bonjour
29/12/2009 3:08:44 PM,** Outlook Sync started **
29/12/2009 3:08:44 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:44 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:44 PM,Attempting to reconnect to outlook
29/12/2009 3:08:44 PM,Re-connect was successful
29/12/2009 3:08:46 PM,** Outlook Sync started **
29/12/2009 3:08:46 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:08:46 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:08:46 PM,Attempting to reconnect to outlook
29/12/2009 3:08:46 PM,Re-connect was successful
29/12/2009 3:09:01 PM,getCalendars returned 3 lists
29/12/2009 3:09:01 PM,getTasks returned 0 tasks
29/12/2009 3:09:02 PM,getTasks (completed) returned 2 tasks
29/12/2009 3:09:02 PM,syncSessionDone called
29/12/2009 3:09:02 PM,** Outlook Sync started **
29/12/2009 3:09:02 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:09:02 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:09:02 PM,Attempting to reconnect to outlook
29/12/2009 3:09:02 PM,Re-connect was successful
29/12/2009 3:12:25 PM,getCalendars returned 3 lists
29/12/2009 3:12:25 PM,syncSessionDone called
29/12/2009 3:12:25 PM,** Outlook Sync started **
29/12/2009 3:12:25 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:12:25 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:12:25 PM,Attempting to reconnect to outlook
29/12/2009 3:12:26 PM,Re-connect was successful
29/12/2009 3:12:35 PM,Desktop Service was created
29/12/2009 3:12:35 PM,Dynamically allocated port : 3164
29/12/2009 3:12:35 PM,Registering service with Bonjour
29/12/2009 3:12:35 PM,** Outlook Sync started **
29/12/2009 3:12:35 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:12:35 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:12:35 PM,Attempting to reconnect to outlook
29/12/2009 3:12:35 PM,Re-connect was successful
29/12/2009 3:12:35 PM,** Outlook Sync started **
29/12/2009 3:12:35 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:12:36 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:12:36 PM,Attempting to reconnect to outlook
29/12/2009 3:12:36 PM,Re-connect was successful
29/12/2009 3:12:51 PM,TaskAdded added task: test
2:000000000A1996CC21CA8D49B0BF0F9CE4C02793246C2100
29/12/2009 3:12:57 PM,** Outlook Sync started **
29/12/2009 3:12:57 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:12:57 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:12:57 PM,Attempting to reconnect to outlook
29/12/2009 3:12:57 PM,Re-connect was successful
29/12/2009 3:13:00 PM,** Outlook Sync started **
29/12/2009 3:13:00 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:13:00 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:13:00 PM,Attempting to reconnect to outlook
29/12/2009 3:13:00 PM,Re-connect was successful
29/12/2009 3:13:04 PM,getCalendars returned 3 lists
29/12/2009 3:13:04 PM,getTasks returned 1 tasks
29/12/2009 3:13:04 PM,getTasks (completed) returned 0 tasks
29/12/2009 3:13:04 PM,syncSessionDone called
29/12/2009 3:13:04 PM,** Outlook Sync started **
29/12/2009 3:13:04 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:13:04 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:13:04 PM,Attempting to reconnect to outlook
29/12/2009 3:13:04 PM,Re-connect was successful
29/12/2009 3:13:44 PM,** Outlook Sync started **
29/12/2009 3:13:44 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:13:44 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:13:44 PM,Attempting to reconnect to outlook
29/12/2009 3:13:44 PM,Re-connect was successful
29/12/2009 3:13:47 PM,getCalendars returned 3 lists
29/12/2009 3:13:48 PM,syncSessionDone called
29/12/2009 3:13:48 PM,** Outlook Sync started **
29/12/2009 3:13:48 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:13:48 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:13:48 PM,Attempting to reconnect to outlook
29/12/2009 3:13:48 PM,Re-connect was successful
29/12/2009 3:13:51 PM,** Outlook Sync started **
29/12/2009 3:13:51 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:13:51 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:13:51 PM,Attempting to reconnect to outlook
29/12/2009 3:13:51 PM,Re-connect was successful
29/12/2009 3:23:10 PM,Desktop Service was created
29/12/2009 3:23:11 PM,Dynamically allocated port : 3499
29/12/2009 3:23:11 PM,Registering service with Bonjour
29/12/2009 3:23:11 PM,** Outlook Sync started **
29/12/2009 3:23:11 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:23:14 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:23:14 PM,Attempting to reconnect to outlook
29/12/2009 3:23:14 PM,Re-connect was successful
29/12/2009 3:23:55 PM,** Outlook Sync started **
29/12/2009 3:23:55 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:23:55 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:23:55 PM,Attempting to reconnect to outlook
29/12/2009 3:23:55 PM,Re-connect was successful
29/12/2009 3:24:03 PM,Changed task: test 2
29/12/2009 3:24:06 PM,getCalendars returned 3 lists
29/12/2009 3:24:06 PM,getTasks returned 0 tasks
29/12/2009 3:24:06 PM,getTasks (completed) returned 1 tasks
29/12/2009 3:24:06 PM,getDeletedTasks returned 0 tasks
29/12/2009 3:24:06 PM,syncSessionDone called
29/12/2009 3:24:06 PM,** Outlook Sync started **
29/12/2009 3:24:06 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:24:06 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:24:06 PM,Attempting to reconnect to outlook
29/12/2009 3:24:06 PM,Re-connect was successful
29/12/2009 3:24:19 PM,Found and deleted the task: test 2
29/12/2009 3:25:31 PM,** Outlook Sync started **
29/12/2009 3:25:31 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:25:31 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:25:31 PM,Attempting to reconnect to outlook
29/12/2009 3:25:31 PM,Re-connect was successful
29/12/2009 3:25:35 PM,getCalendars returned 3 lists
29/12/2009 3:25:35 PM,getContexts returned 0 contexts
29/12/2009 3:25:35 PM,getTasks returned 1 tasks
29/12/2009 3:25:35 PM,getTasks (completed) returned 3 tasks
29/12/2009 3:25:35 PM,syncSessionDone called
29/12/2009 3:25:35 PM,** Outlook Sync started **
29/12/2009 3:25:35 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:25:35 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:25:35 PM,Attempting to reconnect to outlook
29/12/2009 3:25:35 PM,Re-connect was successful
29/12/2009 3:25:41 PM,getCalendars returned 3 lists
29/12/2009 3:25:41 PM,syncSessionDone called
29/12/2009 3:25:41 PM,** Outlook Sync started **
29/12/2009 3:25:41 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:25:42 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:25:42 PM,Attempting to reconnect to outlook
29/12/2009 3:25:42 PM,Re-connect was successful
29/12/2009 3:26:38 PM,getCalendars returned 3 lists
29/12/2009 3:26:39 PM,syncSessionDone called
29/12/2009 3:26:39 PM,** Outlook Sync started **
29/12/2009 3:26:39 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:26:39 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:26:39 PM,Attempting to reconnect to outlook
29/12/2009 3:26:39 PM,Re-connect was successful
29/12/2009 3:26:46 PM,** Outlook Sync started **
29/12/2009 3:26:46 PM,Syncing folders done: 3 Outlook folders, 3 Todo
lists, 0 Todo deleted lists (archived)
29/12/2009 3:26:46 PM,System.Runtime.InteropServices.COMException
(0x8000FFFF): Interface not supported
at Redemption.MAPITableClass.set_Item(Object Value)
at Appigo_Sync.OutlookSyncService.syncTasks()
at Appigo_Sync.OutlookSyncService.doFullSync()
29/12/2009 3:26:46 PM,Attempting to reconnect to outlook
29/12/2009 3:26:46 PM,Re-connect was successful

Outlook doesn't connect to any other programs which sync with tasks.
Any help you can provide would be appreciated.

Thanks

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

You received this message because you are subscribed to the Google
Groups "Appigo Todo" group.
To post to this group, send email to appigo-todo@googlegroups.com
To unsubscribe from this group, send email to
appigo-todo-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/appigo-todo?hl=en

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

You received this message because you are subscribed to the Google
Groups "Appigo Todo" group.
To post to this group, send email to appigo-todo@googlegroups.com
To unsubscribe from this group, send email to
appigo-todo-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/appigo-todo?hl=en

BitWise Controls BC4 Support

0 comments 1:25 PM Posted by osama algendy

Just a quick introduction, and an overview of my planned development
efforts. I'm Mark Buster with BitWise Controls
( www.bitwisecontrols.com ). We make IP enabled control systems
interfaces. I have been playing with the CommandFusion GUI Designer
and iViewer applications, and I think they are a great fit for our
products. It is already possible to use our products with
CommandFusion, but I'm setting about developing "system" files to make
it easier to set up.
A bit about the BC4/BCX-1. It's an IP enabled device with a built-in
IR library (with on-board IR learner), 4 emitter ports plus the IR
learner LED which can be used as an IR blaster, 2 relays, 2 GPIOs
(digital input, analog input, or digital output), internal counter/
frequency input tied to GPIO # 1, a three-wire serial port, and an
internal temperature sensor.

As I said, I'm creating a "System file" which will allow users to
easily set up the BC4 and provide access to all of the hardware
functionality. This will provide the basis for BC4 system support. But
what will make this even more useful, is that I'm also working on a
small utility that will allow you to convert device files exported
from our (soon to be released) Project Editor software, for use with
CommandFusion.
Here's how it will work:
The BC4 Project Editor software allows you to browse the BC4's on-
board IR device library (which includes support for 100s of thousands
of devices), quickly create and test IR "Devices", which include
manufacturer info, factory IR keys, and any learned IR keys you may
add. Then, you can export these devices as a file for use with later
projects, useful when you use the same devices on lots of
installations. These exported device files can be easily converted
(again, I'm making a small utility for this) into the .cfs system file
format used by GUI Designer. This should make setting up re-usable IR
devices very painless.
The Project Editor software also allows you to create control macros
to be stored directly in the BC4. I'll be making the BC4 system file
able to trigger these files.

Anyway, sorry for the long-winded intro. Just wanted to give you guys
a heads-up for what's coming down the road.
Thanks,
Mark

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.

[appigo-todo] Re: Rotate ...

0 comments 5:57 AM Posted by osama algendy

One simple way to prevent rotation when not needed is to not rotate
when device is upside down.
Well, just like the browser of the iPod/iPhone is doing.

Just my 2cents

On Dec 21, 4:21 pm, Appigo Support <supp...@appigo.com> wrote:
> Thank you for contacting us. We apologize for any inconvenience the newly
> introduced landscape mode has caused you to experience. We have added your
> comments about allowing users to turn off landscape mode to our database of
> feature requests to consider for future updates to Todo.
>
> Thanks,
>
> The Appigo Team
> --
> Appigo Support
> supp...@appigo.com
>
> Learn more about Todo (task management made simple), Notebook (notes
> available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's
> website:http://www.appigo.com/
>
> Follow the latest from Appigo on Facebook:http://www.tinyurl.com/appigo-fb
>
> Follow the latest from Appigo on Twitter:http://twitter.com/appigo
>
> Participate with Appigo and our community using the following Google groups:http://groups.google.com/group/appigo-todo/http://groups.google.com/group/appigo-notebook/http://groups.google.com/group/appigo-accufuel/

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

You received this message because you are subscribed to the Google
Groups "Appigo Todo" group.
To post to this group, send email to appigo-todo@googlegroups.com
To unsubscribe from this group, send email to
appigo-todo-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/appigo-todo?hl=en

Wednesday, December 30, 2009

[appigo-accufuel] Re: Accufuel 1.2 issues

0 comments 11:54 PM Posted by osama algendy

Just for kicks, I decided to give AccuFuel another try.

I imported 66 records ranging from Sept 18, 008 to Dec 23, 2009
(starting fresh).

When I look at the individual fill-up via AccuFuel, they look fine.
However, on the graph I get bizarre results:

Graph Timeframe, Average (in miles)
1m, 1061
2m, 1011
3m, 908
6m, 743
1y, 326
2y, 18 (should be 19)
All, 18 (should be 19)

The 2y and All timeframes should show 19 because the average for all
66 fill-ups is 18.84965016 mpg.

Appigo...you have my data since I used your Import Page to import this
data. It would be my second attempt at using that page, as my first
attempt had the Full/Partial (0/1) transposed.

By the way, thank you Appigo for your attempt at fixing AccuFuel for
iPhone 3.x.

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

You received this message because you are subscribed to the Google
Groups "Appigo AccuFuel" group.
To post to this group, send email to appigo-accufuel@googlegroups.com
To unsubscribe from this group, send email to
appigo-accufuel-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/appigo-accufuel?hl=en

Re: [appigo-todo] initial setup of Todo and Synchronization

0 comments 7:17 PM Posted by osama algendy

Mike,

Thank you for your post.

You can find the port that Appigo Sync is using by clicking the "Advance" tab in Appigo Sync Preferences.

The Appigo Team
--
Appigo Support
support@appigo.com

Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

Follow the latest from Appigo on Facebook:
http://www.tinyurl.com/appigo-fb

Follow the latest from Appigo on Twitter:
http://twitter.com/appigo

Participate with Appigo and our community using the following Google groups:
http://groups.google.com/group/appigo-todo/
http://groups.google.com/group/appigo-notebook/
http://groups.google.com/group/appigo-accufuel/

On Tue, Dec 29, 2009 at 3:17 PM, michaelgalligan <michaelgalligan2007@comcast.net> wrote:

ToDo is on my iPhone.
Appigo Synch is running on my computer (Dell).
I am running Outlook 2003.
ToDo does not automatically discover my computer.
I use ipconfig to locate the ip address.
How do I find the port?

Thanks

Mike

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

You received this message because you are subscribed to the Google
Groups "Appigo Todo" group.
To post to this group, send email to appigo-todo@googlegroups.com
To unsubscribe from this group, send email to
appigo-todo-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/appigo-todo?hl=en

[appigo-accufuel] Re: Accufuel 1.2 issues

0 comments 3:22 PM Posted by osama algendy

Very interesting. I updated mine as well and found the same thing,
1772 MPG average over the last three months. If I go out to the one
year average, it's ok. I hope Appigo comes up with a fix soon.

On Dec 29, 8:20 am, PaddyO <donohue.patr...@gmail.com> wrote:
> updated my accufule this morning and the average calculation (which is
> now supposed to be average for just the chosen time period) reads
> really large whole numbers. i.e. my 2008 Sportster reportedly gets
> 9347 MPG Avg over the last month...
>
> I guess I should be looking for a 1.2.1 version from the Appstore
> before long??

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

[appigo-todo] Re: Repeating projects

0 comments 1:28 PM Posted by osama algendy

I've just posted a similar request: the ability to complete subtasks
within a repeating project.

On Dec 27, 5:47 pm, jimmydolittle <gmpy...@googlemail.com> wrote:
> I want to have a project, which I can have repeating say every week,
> in order for me to return to it at a later date. My problem is that
> all completed tasks within the project will become undone again and
> repeat with the parent project, or the Alternative is that all
> uncompleted sub tasks are lost upon the repeat of the project.
>
> What I want is the ability to fill a project with sun tasks. Those
> that are done are done, never to be seen again, and those that are not
> yet complete will repeat with the parent task. I suppose a work
> around is that when a subtask has been completed I delete it for the
> project?
>
> Has this been requested before? Do you understand what I'm asking for?
>
> By the way, I LOVE THIS APP!!

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

[appigo-todo] Completed subtasks in a repeating project

0 comments 1:27 PM Posted by osama algendy

This may be more of a feature request than a bug report, but what I
want to do is this: create a repeating project that has a number of
subtasks that *repeat with the parent task until the subtasks are
completed*.

The current behavior is that when I've completed a subtask and check
it off, it will keep coming back unchecked each time the project is
repeated. If I remove the option "repeat with parent task" from the
subtask and set it to "none", then each time the project is repeated,
the subtasks disappear completely.

I imagine there is no way to get the behavior I want (be able to
complete subtasks within a repeating project) unless I delete the
subtask entirely when I've completed it?

Alex

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

Re: Video for RS232 or any relevant documentation

0 comments 11:05 AM Posted by osama algendy

No you are still doing a bidirectional update w/ regex.

You send the volume command to the Denon from your ipod

Slider sends command of
MV##\x0A\x0D (where XX is a value from 00 to 99 for volume)
or
MVUP\x0A\x0D (turn volume up)
MVDOWN\x0A\x0D (turn volume down)

Denon receiver echos back volume state (via globalcache unit)
MV## (where XX is a value from 00 to 99 for volume)

Use a regexp in Command fusion to capture the value of the volume
feedback from the Denon receiver to update the correct serial join for
your volume slider
MV(.*)

On Dec 30, 10:02 am, Nahshon Williams <spc...@gmail.com> wrote:
> So what you are saying is have a master slave relationship. Ipod gives
> values of volume to denon device, device complies as opposed to bi
> directional updates with regex??
>
>
>
> Fiasco wrote:
> > My question about that would be not updating the volume slider w/ a
> > regex as I've been doing that but passing the value of the slider as
> > the "command value" when the volume slider changes.
>
> > On Dec 29, 3:44 pm, Jarrod Bell <jar...@guilink.com> wrote:
>
> >> Fiasco's method of showing/hiding subpages on top of a button to give
> >> the option of two different commands is a very nice solution. I would
> >> definitely give that a try anyone who needs to send a different
> >> command from a single button on every other press.
>
> >> For grabbing the volume into a slider its as simple as creating a
> >> regex to grab the volume level and then setting the min and max ranges
> >> for the value. Then assign the captured value to an analog join and
> >> use the same join on a gauge or slider and it will update with the
> >> volume level direct feedback from the receiver.
>
> >> Jarrod
>
> >> On Dec 30, 3:52 am, Fiasco <dgvoll...@gmail.com> wrote:
>
> >>> Ouch, that hurts (the socket lockout you mention) and the single
> >>> concurrent connection. Glad to know that
> >>> before I run into it.
>
> >>> On Dec 29, 10:39 am, xAPPO <thor...@gmail.com> wrote:
>
> >>>> I didn't look up the specific Denon model you are controlling but I
> >>>> have my system integrated via a AVR-4306 which has inbuilt Ethernet -
> >>>> regardless the RS232 and TCP socket protocol are much the same. One
> >>>> awkward thing about the Denon via TCP is that if a socket is kept open
> >>>> it can get locked out for some reason, and if this happens it can't
> >>>> reconnect. Only one concurrent connection is supported and so it
> >>>> requires that the Denon be power cycled to reset the socket.
>
> >>>> Because of this you have to make a choice of either a permanent open
> >>>> socket in which case you get real time event information from the
> >>>> Denon or an open/close socket approach which avoids the lockouts but
> >>>> compromises the event information . The latter then requires a few
> >>>> exchanges each connection to recover state information - or a scape
> >>>> from the inbuilt web page.
>
> >>>> K- Hide quoted text -
>
> >> - Show quoted text -
>
> > --
>
> > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.- Hide quoted text -
>
> - Show quoted text -

Re: Video for RS232 or any relevant documentation

0 comments 8:02 AM Posted by osama algendy

So what you are saying is have a master slave relationship. Ipod gives
values of volume to denon device, device complies as opposed to bi
directional updates with regex??

Fiasco wrote:
> My question about that would be not updating the volume slider w/ a
> regex as I've been doing that but passing the value of the slider as
> the "command value" when the volume slider changes.
>
> On Dec 29, 3:44 pm, Jarrod Bell <jar...@guilink.com> wrote:
>
>> Fiasco's method of showing/hiding subpages on top of a button to give
>> the option of two different commands is a very nice solution. I would
>> definitely give that a try anyone who needs to send a different
>> command from a single button on every other press.
>>
>> For grabbing the volume into a slider its as simple as creating a
>> regex to grab the volume level and then setting the min and max ranges
>> for the value. Then assign the captured value to an analog join and
>> use the same join on a gauge or slider and it will update with the
>> volume level direct feedback from the receiver.
>>
>> Jarrod
>>
>> On Dec 30, 3:52 am, Fiasco <dgvoll...@gmail.com> wrote:
>>
>>
>>
>>
>>> Ouch, that hurts (the socket lockout you mention) and the single
>>> concurrent connection. Glad to know that
>>> before I run into it.
>>>
>>> On Dec 29, 10:39 am, xAPPO <thor...@gmail.com> wrote:
>>>
>>>> I didn't look up the specific Denon model you are controlling but I
>>>> have my system integrated via a AVR-4306 which has inbuilt Ethernet -
>>>> regardless the RS232 and TCP socket protocol are much the same. One
>>>> awkward thing about the Denon via TCP is that if a socket is kept open
>>>> it can get locked out for some reason, and if this happens it can't
>>>> reconnect. Only one concurrent connection is supported and so it
>>>> requires that the Denon be power cycled to reset the socket.
>>>>
>>>> Because of this you have to make a choice of either a permanent open
>>>> socket in which case you get real time event information from the
>>>> Denon or an open/close socket approach which avoids the lockouts but
>>>> compromises the event information . The latter then requires a few
>>>> exchanges each connection to recover state information - or a scape
>>>> from the inbuilt web page.
>>>>
>>>> K- Hide quoted text -
>>>>
>> - Show quoted text -
>>
>
> --
>
> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> To post to this group, send email to commandfusion@googlegroups.com.
> To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.
>
>
>
>

Re: Video for RS232 or any relevant documentation

0 comments 6:19 AM Posted by osama algendy

My question about that would be not updating the volume slider w/ a
regex as I've been doing that but passing the value of the slider as
the "command value" when the volume slider changes.

On Dec 29, 3:44 pm, Jarrod Bell <jar...@guilink.com> wrote:
> Fiasco's method of showing/hiding subpages on top of a button to give
> the option of two different commands is a very nice solution. I would
> definitely give that a try anyone who needs to send a different
> command from a single button on every other press.
>
> For grabbing the volume into a slider its as simple as creating a
> regex to grab the volume level and then setting the min and max ranges
> for the value. Then assign the captured value to an analog join and
> use the same join on a gauge or slider and it will update with the
> volume level direct feedback from the receiver.
>
> Jarrod
>
> On Dec 30, 3:52 am, Fiasco <dgvoll...@gmail.com> wrote:
>
>
>
> > Ouch, that hurts (the socket lockout you mention) and the single
> > concurrent connection. Glad to know that
> > before I run into it.
>
> > On Dec 29, 10:39 am, xAPPO <thor...@gmail.com> wrote:
>
> > > I didn't look up the specific Denon model you are controlling but I
> > > have my system integrated via a AVR-4306 which has inbuilt Ethernet -
> > > regardless the RS232 and TCP socket protocol are much the same. One
> > > awkward thing about the Denon via TCP is that if a socket is kept open
> > > it can get locked out for some reason, and if this happens it can't
> > > reconnect. Only one concurrent connection is supported and so it
> > > requires that the Denon be power cycled to reset the socket.
>
> > > Because of this you have to make a choice of either a permanent open
> > > socket in which case you get real time event information from the
> > > Denon or an open/close socket approach which avoids the lockouts but
> > > compromises the event information . The latter then requires a few
> > > exchanges each connection to recover state information - or a scape
> > > from the inbuilt web page.
>
> > > K- Hide quoted text -
>
> - Show quoted text -

Tuesday, December 29, 2009

[appigo-todo] Outlook-Todo Sync Problem (Due Dates)

0 comments 5:16 PM Posted by osama algendy

All items sync beautifully both ways between Outlook and iPhone ToDo.
No problems.
Except when it comes to Due Dates. These do not sync either way?
What am I doing wrong? Please advise. Thanks.

Tom.

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

[appigo-todo] initial setup of Todo and Synchronization

0 comments 2:17 PM Posted by osama algendy

ToDo is on my iPhone.
Appigo Synch is running on my computer (Dell).
I am running Outlook 2003.
ToDo does not automatically discover my computer.
I use ipconfig to locate the ip address.
How do I find the port?

Thanks

Mike

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

Re: Video for RS232 or any relevant documentation

0 comments 1:44 PM Posted by osama algendy

Fiasco's method of showing/hiding subpages on top of a button to give
the option of two different commands is a very nice solution. I would
definitely give that a try anyone who needs to send a different
command from a single button on every other press.

For grabbing the volume into a slider its as simple as creating a
regex to grab the volume level and then setting the min and max ranges
for the value. Then assign the captured value to an analog join and
use the same join on a gauge or slider and it will update with the
volume level direct feedback from the receiver.

Jarrod

On Dec 30, 3:52 am, Fiasco <dgvoll...@gmail.com> wrote:
> Ouch, that hurts (the socket lockout you mention) and the single
> concurrent connection. Glad to know that
> before I run into it.
>
> On Dec 29, 10:39 am, xAPPO <thor...@gmail.com> wrote:
>
>
>
> > I didn't look up the specific Denon model you are controlling but I
> > have my system integrated via a AVR-4306 which has inbuilt Ethernet -
> > regardless the RS232 and TCP socket protocol are much the same. One
> > awkward thing about the Denon via TCP is that if a socket is kept open
> > it can get locked out for some reason, and if this happens it can't
> > reconnect. Only one concurrent connection is supported and so it
> > requires that the Denon be power cycled to reset the socket.
>
> > Because of this you have to make a choice of either a permanent open
> > socket in which case you get real time event information from the
> > Denon or an open/close socket approach which avoids the lockouts but
> > compromises the event information . The latter then requires a few
> > exchanges each connection to recover state information - or a scape
> > from the inbuilt web page.
>
> > K

Re: Development version of CF

0 comments 1:41 PM Posted by osama algendy

There sure is Jim, please login to our website and go to the license
registration page. From there you will find some instructions on what
you need to send to us to get a developers license.

Jarrod

On Dec 30, 7:50 am, Jim Provan <jpro...@gmail.com> wrote:
> That is exactly what I found. Placing the 50 ms delay in front of the
> command worked (as Nahshon suggested). I am going through a Global Cache
> which has an inherent delay in it. I used the GC Learner facility to "learn"
> the IR code. The code is working properly now.
>
> I am an AMX/Crestron programmer, so the issues with the IR toggling codes is
> not new to me.
>
> Is there a development license that will allow people like me to develop
> full blown apps (including page flips)?
>
> Jim Provan
>
>
>
> On Mon, Dec 28, 2009 at 5:18 PM, Jarrod Bell <jar...@guilink.com> wrote:
> > The only limitation of the unregistered version is that you can only
> > use one landscape page and one portrait page. The development license
> > is a full license just like a paid one.
>
> > Can you copy/paste the complete code you are using? You might have to
> > relearn the code with the repeat count set to 2 (or more) via the GC
> > software. Some hardware use toggling IR codes for each press.
> > Changing the repeat delay to a small number like 50ms will force the
> > code to be sent twice which will fix the problem, but relearning the
> > IR code correctly is the best option. You may find that the code you
> > originally will work sometimes, but not every time due to the toggling
> > nature of the IR code the hardware is using.
>
> > Jarrod
>
> > On Dec 29, 8:51 am, Nahshon Williams <spc...@gmail.com> wrote:
> > > I meant "repeat delay" in button properties sorry, watched the video on
> > > the blog.
> > > I have issues getting macros to work maybe you can help :-)
>
> > > AVGuy wrote:
> > > > Thank you for the quick response. A delay infers a macro instead of a
> > > > command. Is this the way you approached the issue ?
>
> > > > I have one macro where I send a channel preset and placed a 50 msec
> > > > delay before each channel number. That stabilized that command at
> > > > least.
> > > > So if it needs to be a macro for each item, that's okay. It is a
> > > > little unfortunate, but works.
>
> > > > On Dec 28, 1:23 pm, Nahshon Williams <spc...@gmail.com> wrote:
>
> > > >> Add a delay of 50 milli seconds to the command, that did the trick for
> > me.
> > > >> Also make it momentary not toggle.
> > > >> In the IR learner utility, are you using the correct port? It should
> > be
> > > >> module 4 and then connector 1, 2 or 3.
>
> > > >> AVGuy wrote:
>
> > > >>> I have done a VERY simple test design to send an IR Power Toggle to
> > an
> > > >>> LG Plasma via a GC-100. The command does not turn the TV on. I
> > > >>> verified with the GC Test Utility that the command is correct. Is
> > this
> > > >>> an issue with the development version of the program being crippled
> > > >>> because it is a development version ?
>
> > > >>> --
>
> > > >>> You received this message because you are subscribed to the Google
> > Groups "CommandFusion" group.
> > > >>> To post to this group, send email to commandfusion@googlegroups.com.
> > > >>> To unsubscribe from this group, send email to
> > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog legroups.com>
> > .
> > > >>> For more options, visit this group athttp://
> > groups.google.com/group/commandfusion?hl=en.
>
> > > > --
>
> > > > You received this message because you are subscribed to the Google
> > Groups "CommandFusion" group.
> > > > To post to this group, send email to commandfusion@googlegroups.com.
> > > > To unsubscribe from this group, send email to
> > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog legroups.com>
> > .
> > > > For more options, visit this group athttp://
> > groups.google.com/group/commandfusion?hl=en.
>
> > --
>
> > You received this message because you are subscribed to the Google Groups
> > "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to
> > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog legroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/commandfusion?hl=en.

Re: [appigo-accufuel] Accufuel 1.2 issues

0 comments 1:40 PM Posted by osama algendy

PaddyO,

Thank you for contacting Appigo. We apologize for any inconvenience you may have experienced with the calculation of average gas consumption being incorrect. We are aware of this issue and we are working to release a fix as soon as possible.

Thanks,

The Appigo Team
--
Appigo Support
support@appigo.com

Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

Follow the latest from Appigo on Facebook:
http://www.tinyurl.com/appigo-fb

Follow the latest from Appigo on Twitter:
http://twitter.com/appigo

Participate with Appigo and our community using the following Google groups:
http://groups.google.com/group/appigo-todo/
http://groups.google.com/group/appigo-notebook/
http://groups.google.com/group/appigo-accufuel/

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

You received this message because you are subscribed to the Google
Groups "Appigo AccuFuel" group.
To post to this group, send email to appigo-accufuel@googlegroups.com
To unsubscribe from this group, send email to
appigo-accufuel-unsubscribe@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/appigo-accufuel?hl=en

Re: Development version of CF

0 comments 12:50 PM Posted by osama algendy

That is exactly what I found. Placing the 50 ms delay in front of the command worked (as Nahshon suggested). I am going through a Global Cache which has an inherent delay in it. I used the GC Learner facility to "learn" the IR code. The code is working properly now.

I am an AMX/Crestron programmer, so the issues with the IR toggling codes is not new to me.

Is there a development license that will allow people like me to develop full blown apps (including page flips)?

Jim Provan

On Mon, Dec 28, 2009 at 5:18 PM, Jarrod Bell <jarrod@guilink.com> wrote:

The only limitation of the unregistered version is that you can only
use one landscape page and one portrait page. The development license
is a full license just like a paid one.

Can you copy/paste the complete code you are using? You might have to
relearn the code with the repeat count set to 2 (or more) via the GC
software. Some hardware use toggling IR codes for each press.
Changing the repeat delay to a small number like 50ms will force the
code to be sent twice which will fix the problem, but relearning the
IR code correctly is the best option. You may find that the code you
originally will work sometimes, but not every time due to the toggling
nature of the IR code the hardware is using.

Jarrod

On Dec 29, 8:51 am, Nahshon Williams <spc...@gmail.com> wrote:
> I meant "repeat delay" in button properties sorry, watched the video on
> the blog.
> I have issues getting macros to work maybe you can help :-)
>
>
>
> AVGuy wrote:
> > Thank you for the quick response. A delay infers a macro instead of a
> > command. Is this the way you approached the issue ?
>
> > I have one macro where I send a channel preset and placed a 50 msec
> > delay before each channel number. That stabilized that command at
> > least.
> > So if it needs to be a macro for each item, that's okay. It is a
> > little unfortunate, but works.
>
> > On Dec 28, 1:23 pm, Nahshon Williams <spc...@gmail.com> wrote:
>
> >> Add a delay of 50 milli seconds to the command, that did the trick for me.
> >> Also make it momentary not toggle.
> >> In the IR learner utility, are you using the correct port? It should be
> >> module 4 and then connector 1, 2 or 3.
>
> >> AVGuy wrote:
>
> >>> I have done a VERY simple test design to send an IR Power Toggle to an
> >>> LG Plasma via a GC-100. The command does not turn the TV on. I
> >>> verified with the GC Test Utility that the command is correct. Is this
> >>> an issue with the development version of the program being crippled
> >>> because it is a development version ?
>
> >>> --
>
> >>> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> >>> To post to this group, send email to commandfusion@googlegroups.com.
> >>> To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> >>> For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
>
> > --
>
> > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.

[appigo-accufuel] Re: Accufuel 1.2 issues

0 comments 11:51 AM Posted by osama algendy

Same problem here...

On Dec 29, 9:20 am, PaddyO <donohue.patr...@gmail.com> wrote:
> updated my accufule this morning and the average calculation (which is
> now supposed to be average for just the chosen time period) reads
> really large whole numbers. i.e. my 2008 Sportster reportedly gets
> 9347 MPG Avg over the last month...
>
> I guess I should be looking for a 1.2.1 version from the Appstore
> before long??

--
Learn more about Todo (task management made simple), Notebook (notes available everywhere), and AccuFuel (fuel efficiency tracker) on Appigo's website: http://www.appigo.com/

Re: Video for RS232 or any relevant documentation

0 comments 8:52 AM Posted by osama algendy

Ouch, that hurts (the socket lockout you mention) and the single
concurrent connection. Glad to know that
before I run into it.

On Dec 29, 10:39 am, xAPPO <thor...@gmail.com> wrote:
> I didn't look up the specific Denon model you are controlling but I
> have my system integrated via a AVR-4306 which has inbuilt Ethernet -
> regardless the RS232 and TCP socket protocol are much the same. One
> awkward thing about the Denon via TCP is that if a socket is kept open
> it can get locked out for some reason, and if this happens it can't
> reconnect. Only one concurrent connection is supported and so it
> requires that the Denon be power cycled to reset the socket.
>
> Because of this you have to make a choice of either a permanent open
> socket in which case you get real time event information from the
> Denon or an open/close socket approach which avoids the lockouts but
> compromises the event information . The latter then requires a few
> exchanges each connection to recover state information - or a scape
> from the inbuilt web page.
>
> K

Re: Video for RS232 or any relevant documentation

0 comments 8:39 AM Posted by osama algendy

I didn't look up the specific Denon model you are controlling but I
have my system integrated via a AVR-4306 which has inbuilt Ethernet -
regardless the RS232 and TCP socket protocol are much the same. One
awkward thing about the Denon via TCP is that if a socket is kept open
it can get locked out for some reason, and if this happens it can't
reconnect. Only one concurrent connection is supported and so it
requires that the Denon be power cycled to reset the socket.

Because of this you have to make a choice of either a permanent open
socket in which case you get real time event information from the
Denon or an open/close socket approach which avoids the lockouts but
compromises the event information . The latter then requires a few
exchanges each connection to recover state information - or a scape
from the inbuilt web page.

Re: Video for RS232 or any relevant documentation

0 comments 8:20 AM Posted by osama algendy

I'm not exactly sure how to send the value of a volume slider through
a system command. Maybe Jarrod can shed some light on that. I use
a 3rd party (eventghost) to do it.

On Dec 29, 10:13 am, Fiasco <dgvoll...@gmail.com> wrote:
> I'm not sure how you "talk" to your denon (globalcache or something
> similar I assume)
>
> Here is how I do "power state" indication. Because the Denon has
> discrete (seperate) power on and power off commands and Command Fusion
> can't send multiple commands from one button I do this: (this is also
> an answer to your question about toggling a switch for On/Off)
>
> Create a single button (Digital Join 1). (Your "Turn On" button)
> Create a subpage (Digital Join 2)
> Create a button on the subpage (Digital Join 3) (Your "Turn Off"
> button)
>
> Add the subpage to your remote screen and place it in the exact same
> position as your "On" button.
>
> Digital Join 1 will be your button to toggle the "On" state and will
> send PWON\x0A\x0D via serial to the receiver.
> Digital Join 3 will be your button to toggle the "Off" state and will
> send PWSTANDBY\x0A\x0D via serial to the receiver
>
> Now create feedback in the system manager. I don't have a denon in
> front of me so I can't remember off the top of my head what the denon
> echo's back on a state change. If Denon is like Onkyo it simply
> echos the successfull command back.
>
> For your feedback in system manager your going to want to try
> something like
>
> feedback name: Power State
> regex field: PW(.*)
> data type: digital
> join: 2
> min val: 0
> max val: 1
> off value: STANDBY
> on value: ON
>
> What this is going to do is toggle the state of the subpage (join 2)
> based on what the power state of the Denon receiver is. When the
> receiver is ON, the subpage is going to overlay your "ON" button in
> your remote screen. This now visible subpage contains a button (Join
> 3) which is your "OFF" button. Clicking the OFF button will turn
> your Denon off and cause the subpage to be hidden revealing the "ON"
> button again. If you use different artwork for your OFF and ON
> buttons, you now have a visual indicator of the power state of your
> Denon receiver.
>
> On Dec 29, 9:34 am, Fiasco <dgvoll...@gmail.com> wrote:
>
>
>
> > I can say without a doubt that you can get two way communication with
> > your Denon Receiver if it has a serial port.
>
> > I just setup a house w/ command fusion remote that has two Denon
> > receivers and the remote provides visual feedback
> > including volume, power state, listening mode, sleep timer, mute state
> > and input state.
>
> > On Dec 28, 5:25 pm, Jarrod Bell <jar...@guilink.com> wrote:
>
> > > When controlling serial devices, you need to create a new system in
> > > your project which has connection details relevant to the GC-100
> > > serial port you are using.
> > > Each serial port has a different TCP port. Then the command you send
> > > is exactly as the Denon device requires (no need to add any extra info
> > > to the command as the GC-100 serial ports are just pass through
> > > ports).
>
> > > For parsing feedback, please see the examples in our wiki -www.commandfusion.com/wiki
> > > You should be able to parse the feedback easily from Denon devices (if
> > > I recall, been a while since I worked with one).
>
> > > You cannot send two different commands from a button. We will be
> > > eventually adding the ability to send different commands on press and
> > > release, but not different commands toggled by each press (at least
> > > not immediately anyway).
> > > You might also want to check if the projector you are using is able to
> > > control the screen automatically (if thats what you meant by 'screen'
> > > - most projectors these days have outputs for screen control).
>
> > > Jarrod
>
> > > On Dec 29, 6:56 am, Nahshon Williams <spc...@gmail.com> wrote:
>
> > > > Hello all,
> > > > I have a working IR and Relay set up thanks to the video on your blog.
> > > > (the relay was easy)
> > > > We would like to use the serial port for communication with the denon in
> > > > this rig:www.vandermehrn.com/lc
> > > > Need to get 2 way feedback so that one can see current volume and so on.
> > > > Is this possible? Are there any example gui files out there? (fully
> > > > populated remote that uses all hardware features of gc100)
>
> > > > Also
> > > > As I am using the relay for a sompfy screen I need to create a screen up
> > > > and screen down button.
> > > > Is there a way I can do this with just on button which closes the switch
> > > > on toggle and closes another switch on release?
> > > > In other words can I have independent commands on toggle and release?
>
> > > > Using the following
> > > > GC100-12
> > > > Conrolfx and Iviewer 2.2
> > > > Ipod Touch
>
> > > > P.S. any pointers would be very much appreciated . . .- Hide quoted text -
>
> > > - Show quoted text -- Hide quoted text -
>
> > - Show quoted text -- Hide quoted text -
>
> - Show quoted text -

ipod touch wizard: free ipod touch hacks, news and tricks

Thursday, December 31, 2009

Re: [appigo-todo] Todo Sync Issue with Outlook

BitWise Controls BC4 Support

[appigo-todo] Re: Rotate ...

Wednesday, December 30, 2009

[appigo-accufuel] Re: Accufuel 1.2 issues

Re: [appigo-todo] initial setup of Todo and Synchronization

[appigo-accufuel] Re: Accufuel 1.2 issues

[appigo-todo] Re: Repeating projects

[appigo-todo] Completed subtasks in a repeating project

Re: Video for RS232 or any relevant documentation

Re: Video for RS232 or any relevant documentation

Re: Video for RS232 or any relevant documentation

Tuesday, December 29, 2009

[appigo-todo] Outlook-Todo Sync Problem (Due Dates)

[appigo-todo] initial setup of Todo and Synchronization

Re: Video for RS232 or any relevant documentation

Re: Development version of CF

Re: [appigo-accufuel] Accufuel 1.2 issues

Re: Development version of CF

[appigo-accufuel] Re: Accufuel 1.2 issues

Re: Video for RS232 or any relevant documentation

Re: Video for RS232 or any relevant documentation

Re: Video for RS232 or any relevant documentation

eNews & Updates

Labels

Blog Archive

Live Traffic

sponsers