Re: RS232 receiving data

Thank you.
I`ll try this

On 1 jun, 10:23, Jarrod Bell <jar...@guilink.com> wrote:
> Yes you can.
> 1. Setup the system EOM character depending on the protocol of the
> device you are controlling.
> 2. Create a feedback item and enter the regex to capture whatever data
> you need.
> 3. Create the necessary capture groups to format the data and assign
> to a join.
> 4. Create an object on the same join.
>
> We can help with more details if you provide an example of the data
> coming back and what you want to capture.
>
> Jarrod
>
> On Jun 1, 11:00 pm, Leandro <lsud...@gmail.com> wrote:
>
> > Thanks
> > My GC100 is working fine on my system. I`m also controllig some stuff
> > viaRS232. I want to know if I can read the port 4999 0r 5000 with
> > iViewer and display the  data on the iphone
>
> > Thanks
>
> > On 28 mayo, 19:19, Nahshon Williams <spc...@gmail.com> wrote:
>
> > > Leandro
> > > You need to know what protocol your device uses? Who is the manufacturer?
> > > The GC 100 serial (rs232) works with the following ports: 4999 and Port
> > > 5000 TCP Only
> > > You need to create a new system and create commands (based on the protocol).
> > > Let me know if you need further help. . .
>
> > > You need the following to be working in the correct order
> > > 0)Do you have the serial protocol of your device?
> > > 1) Do you have the right serial cable? (is the pin out correct?)
> > > 2)Have you configured the GC100 with the correct port settings? (do you
> > > have the right baud rates?)
> > > 3)Have you imported the plugin for the GC100 into Gui Designer?
> > > 4)Have you used the correct EOM character for feedback? (in system
> > > properties)
> > > 5)Have you terminated your command with the correct character? eg \x0D
> > > or \x0A or any other terminator as specified by the protocol.
> > > 6)Is your router configured to work with the GC100 (does the light
> > > flicker when you press a button? are you on the same subnet as the GC100?)
>
> > > Nahshon
>
> > > On 28/05/2010 20:50, Leandro wrote:
>
> > > > Hi everybody. I`m new on this. Can anyone help me and tell me how can
> > > > I do to receive data from a 232 port on GC-100 and display that on an
> > > > iphone.
>
> > > > Thanks
>
> > > > Leandro

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.