Re: Trouble Uploading GUI to iPod Touch

Not sure exactly what message is being sent from EG, but is there any
reason you have the EOM of the system set to && ?
This will stop messages being parsed by the feedback system until the
string '&&' is received. Also, it looks as if the 60 is hardcoded into
your EG setup, not sure exactly how the EG side should work with the
Denon.

If there is no end of message that is constant for all messages being
sent, leave it blank and messages will be put through the feedback
parsing engine as they arrive.
You might also want to try removing the start and end characters from
the regex if not using an EOM.

I'm also assuming you have a gauge or slider set to analog join 1?

Jarrod

On Mar 4, 1:49 pm, Howard Johnson <hdjohnso...@gmail.com> wrote:
> I have still not figured out how to get feedback. I have attached
> screenshots showing the settings which I believe are relevant to displaying
> the Master Volume from my Denon AVR. What am I missing? I appreciate any
> examples anyone could provide.
>
> Howard
>
>
>
>
>
> On Mon, Mar 1, 2010 at 7:25 PM, Howard <hdjohnso...@gmail.com> wrote:
> > I found the broadcaster plugin. I will try to figure out how to use
> > it.
>
> > Howard
>
> > On Feb 28, 5:05 pm, Howard <hdjohnso...@gmail.com> wrote:
> > > Is the broadcast plugin you mentioned the same as the "network event
> > > sender" plugin in EG? I don't see a "broadcast plugin.
>
> > > Howard
>
> > > On Feb 28, 2:23 pm, Fiasco <dgvoll...@gmail.com> wrote:
>
> > > > honestly, I wouldn't use the commandfusion plugin for eventghost.  It
> > > > works but will stop working after a period of time requiring a restart
> > > > of eventghost.
>
> > > > I use the broadcaster plugin.  Basically the commandfusion remote just
> > > > shouts commands on the universal address via UDP and any device on the
> > > > network can hear it.
>
> > > > You can do auto repeat buttons this way (like channel up or volume)
>
> > > > On Feb 27, 7:31 am, Howard <hdjohnso...@gmail.com> wrote:
>
> > > > > Thanks for making your excellent work available for others to use. I
> > > > > may eventually try to learn Python and make EG plugins, but I am not
> > a
> > > > > programmer. I think it would take a lot of time.
>
> > > > > I am now working on understanding the way feedback works in the CF/EG
> > > > > system. This capability is one of the major things which attracted me
> > > > > to CommandFusion rather than other control software for the iPhone/
> > > > > iPod Touch.
>
> > > > > Howard
>
> > > > > On Feb 27, 2:21 am, Fiasco <dgvoll...@gmail.com> wrote:
>
> > > > > > Good to see my dtv plugin in use :)
> > > > > > On Feb 26, 6:12 pm, Jarrod Bell <jar...@guilink.com> wrote:
>
> > > > > > > Oh, and make sure the Upload Service is active in guiDesigner
> > when you
> > > > > > > launch iViewer.
> > > > > > > Otherwise turn off 'Reload GUI File' option on the iPod and it
> > will
> > > > > > > load from cache on next launch.
>
> > > > > > > Jarrod
>
> > > > > > > On Feb 27, 7:58 am, Howard <hdjohnso...@gmail.com> wrote:
>
> > > > > > > > I need some help with uploading the GUI to my iPod Touch.
>
> > > > > > > >  My HTPC is connected via serial ports to a Denon 3805 AVR and
> > a
> > > > > > > > Directv HR-21. I can control these devices using EventGhost.
>
> > > > > > > > I have added the CommandFusion plugin to EG and installed
> > guiDesigner
> > > > > > > > on my HTPC and have uploaded the example.gui and the free.gui
> > to my
> > > > > > > > iPod Touch. I successfully used the iPod Touch to generate
> > events in
> > > > > > > > EG and connected these events to macros to successfully control
> > the
> > > > > > > > Denon and the DTV.
>
> > > > > > > > I am now trying to get feedback from these devices to the iPod
> > Touch,
> > > > > > > > but, I am now having difficulty uploading the GUI. I have
> > obviously
> > > > > > > > changed something in the process of working on the feedback,
> > but I can
> > > > > > > > not figure out what it is. It must be something simple which
> > should be
> > > > > > > > obvious, but I have spent several hours with no success.
>
> > > > > > > > I am using the settings below. I get a message on the Touch
> > "Can't
> > > > > > > > read GUI file at http//192.168.1.9:8019" and the EG log shows
> > "
> > > > > > > > CommandFusion connection lost".
>
> > > > > > > > CF Plugin in EG
> > > > > > > >       Port = 8019
>
> > > > > > > > Project Properties:
> > > > > > > >       IP =  192.168.1.9:8019
> > > > > > > >       Connection Join = 0
> > > > > > > >       Enable Debug Mode = checked
>
> > > > > > > > Upload Service
> > > > > > > >       Port 8019
> > > > > > > >       Set GUI URL to:192.168.1.9:8019
>
> > > > > > > > iPod
> > > > > > > >       File URL:192.168.1.9:8019
> > > > > > > >       Reload GUI file - ON
> > > > > > > >       Remember Last GUI = OFF
> > > > > > > >       Preload Images = ON
>
> > > > > > > > Howard
>
> > --
> > You received this message because you are subscribed to the Google Groups
> > "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to
> > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog legroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/commandfusion?hl=en.
>
> --
> Howard
>
>  Volume Feedback.doc
> 1017KViewDownload

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.