Re: Feedback to Guage on Denon - Now Working

Hi Jarrod !

I don't know for the Denon, but I try this REGEX MV(\d{1,2})\x0D and
it woks. The regex skip the third number. The gauge don't move when .
5 is display, but is not to bad for now. Is it possible to see the DB
in the serial join ?

Thanks
Samtronic

On 24 mar, 22:08, Jarrod Bell <jar...@guilink.com> wrote:
> Looks like its showing incremental values without a decimal point:
> 18, 18.5, 19, 19.5
>
> Maybe there is a setting on the Denon unit to change the way it
> reports volume back to ascii mode (0-99).
>
> It's EOM btw, not OEM.
>
> Jarrod
>
> On Mar 25, 1:05 pm, Samtronic <samtroni...@gmail.com> wrote:
>
>
>
> > Hi !
>
> > I try it tonight  with the serial join and OEM st to \x0D. I think the
> > OEM work. but a have another problem. Exemple I saw in the text MV18,
> > the gauge is ok. I press volume up, I saw in the text MV185 and the
> > gauge goes completly  up. I press volume up I saw MV19 and the gauge
> > is ok . I press volume up I saw  MV195 the gauge goes complety up
> > etc..
>
> > Thanks
> > Samtronic
>
> > On 24 mar, 12:41, Jarrod Bell <jar...@guilink.com> wrote:
>
> > > Try setting the EOM to \x0D
>
> > > I believe that all messages coming in from Denon end with carriage
> > > return (\x0D) correct?
> > > Then regex of MV(\d*)\x0D should work (after adding a capture group
> > > with the same analog join as a slider or gauge).
>
> > > You can also add a feedback item with regex (.*) and create a capture
> > > group for serial join, then assign the same serial join to a text
> > > object and see all data that comes in.
>
> > > Jarrod
>
> > > On Mar 25, 3:28 am, Samtronic <samtroni...@gmail.com> wrote:
>
> > > > Hi Jarrod !
>
> > > > I use Eventghost for controlling XBMC, MPC-HC on my HTPC. In the
> > > > project properties, I configured the ip address of my HTPC, port 456,
> > > > connection join 0, Enable debug mode don't thick. It works well with
> > > > Eventghost. For the system manager I configured one System for the
> > > > Denon. It's the ip address of my server, where the TCP2SERIAL
> > > > application runs 24h. Port 888, TCP thick,maintain constant connection
> > > > thick,
> > > > Heartbeat manage by system don't thick, heartbeat TX RX nothing, OEM
> > > > nothing, connection join 0, startup cmd none.
>
> > > > Thank you for your help
>
> > > > Samtronic
>
> > > > On 24 mar, 09:32, Jarrod Bell <jar...@guilink.com> wrote:
>
> > > > > Can you please list all the properties you have set for every system
> > > > > in system manager?
> > > > > Or are you using EventGhost and our plugin with connection details set
> > > > > in the project properties?
>
> > > > > Jarrod
>
> > > > > On Mar 24, 11:24 pm, Samtronic <samtroni...@gmail.com> wrote:
>
> > > > > > Hi!
>
> > > > > > First of all thank for this tuto. I have a problem with de guage. In
> > > > > > the feedback properties I put this regex MV(\d*)\x0D. I try this one
> > > > > > ^MV(\d*)\x0D$ , but it does not work.
> > > > > > My problem is that the gauge is erratic. When I press volume down or
> > > > > > up, sometime it works, but most of the time the gauge does not respond
> > > > > > well.
> > > > > > it goes completly up or down. I use TCP2Serial on my computer to
> > > > > > control my Denon 2307ci.
>
> > > > > > Thanks
> > > > > > Samtronic
>
> > > > > > P.S sorry for my english
> > > > > > On 3 mar, 22:19, Fiasco <dgvoll...@gmail.com> wrote:
>
> > > > > > >http://scores.warbirdsiii.com/onkyors232.xls
>
> > > > > > > On Mar 3, 6:27 pm, Fiasco <dgvoll...@gmail.com> wrote:
>
> > > > > > > > I'll upload it and post a link later tonight
>
> > > > > > > > On Mar 3, 1:38 pm, Nahshon Williams <spc...@gmail.com> wrote:
>
> > > > > > > > > Fiaso, it is on your enthusiasm that I have elected to get the onkyo.  
> > > > > > > > > Where can I find their protocol? Could you email me a copy?
> > > > > > > > > I am currently working on an "apple style" remote for the onkyo for now
> > > > > > > > > just the images and buttons.
> > > > > > > > > I emailed onkyo (no response yet).  Downloaded the 156 page manual for
> > > > > > > > > the tx-nr-5007 but no mention of the protocol.
> > > > > > > > > The unit is difficult to find in London. The shop keeps telling me they
> > > > > > > > > will be in stock soon. I hope it is worth the wait. . .
>
> > > > > > > > > On 03/03/2010 19:13, Fiasco wrote:
>
> > > > > > > > > > Love my Onkyo 875.   RS232 protocol is fantastic and I run all three
> > > > > > > > > > zones through command fusion.
>
> > > > > > > > > > On Mar 3, 4:50 am, Nahshon Williams<spc...@gmail.com>  wrote:
>
> > > > > > > > > >> I have not yet finished the project :-(                        
> > > > > > > > > >> (Thinking of moving to onkyo as zones not working on thisdenon)
>
> > > > > > > > > >> Anyway here is how I was able to get feedback working.
>
> > > > > > > > > >> Here are the images that I use:  http://vandermehrn.com/lc/feedback/
>
> > > > > > > > > >> Everything lies in the REGEX.
> > > > > > > > > >> Things to note.
>
> > > > > > > > > >> You do not need to escape the "\" in "\x0D" EXCEPT when testing your
> > > > > > > > > >> regex in the regex tester. (no quotes in regex)
>
> > > > > > > > > >> For example to get feedback on the guage for volume, I send thedenon;
>
> > > > > > > > > >> MVUP\x0D
>
> > > > > > > > > >> Thedenonresponds with
>
> > > > > > > > > >> MV50\x0D . . . MV51\x0D. . .MV52\x0D. . .MV53\x0D and so on as long as
> > > > > > > > > >> it gets a new "volume up" command it will respond with the new change in
> > > > > > > > > >> value.
>
> > > > > > > > > >> A regex to capture this would be ^MV(\d*)\x0D$  (Thanks Jarrod. . . see
> > > > > > > > > >> below)
> > > > > > > > > >> The first and last characters of  that regex are for matching the
> > > > > > > > > >> responses that have that exact format. (in case there are other
> > > > > > > > > >> responses) in the data stream.
> > > > > > > > > >> What is important is that the values in the brackets are captured.
>
> > > > > > > > > >> We will now need to assosciate these captured values\events to a guage.
> > > > > > > > > >> To do this we need to give a guage and the captured event the same join
> > > > > > > > > >> numbers.
> > > > > > > > > >> In this case 222.
>
> > > > > > > > > >> We also need to specify the minimum and maximum values for the guage so
> > > > > > > > > >> it is scaled correctly. (in the feedback manager)
> > > > > > > > > >> For thisDenonthe volume response range goes from 0 - 98.
>
> > > > > > > > > >> I learn as I go so anyone please add what you might think I missed out.
> > > > > > > > > >> . . .
>
> > > > > > > > > >> xcuse tpyos
>
> > > > > > > > > >> Nahshon
>
> > > > > > > > > >> On 03/03/2010 01:42, Howard wrote:
>
> > > > > > > > > >>> Nahshon - Did you ever do the "how to" tutorial? I am trying to
> > > > > > > > > >>> understand how to setup feedback from aDenonAVR to iViewer on an
> > > > > > > > > >>> iPod Touch via the broadcaster plugin in Eventghost and having
> > > > > > > > > >>> difficulty.
>
> > > > > > > > > >>> Howard
>
> > > > > > > > > >>> On Jan 19, 11:05 am, Nahshon Williams<spc...@gmail.com>    wrote:
>
> > > > > > > > > >>>> Thank you Jarod
>
> > > > > > > > > >>>> I now have feedback on the guage.
> > > > > > > > > >>>> I am thinking of writing a mini "how to" tutorial when I complete this
> > > > > > > > > >>>> project.
> > > > > > > > > >>>> There is are little nuances here and there . . .
>
> > > > > > > > > >>>> Nahshon
>
> > > > > > > > > >>>> Jarrod Bell wrote:
>
> > > > > > > > > >>>>> When using hex bytes in the regex, you don't escape the backslash. So
> > > > > > > > > >>>>> the regex should be:
> > > > > > > > > >>>>> ^MV(\d*)\x0D$
> > > > > > > > > >>>>> or
> > > > > > > > > >>>>> MV(\d*)\x0D
>
> > > > > > > > > >>>>> You would need to copy/paste the string that is being matched against
> > > > > > > > > >>>>> into the regex tester within guiDesigner as you cannot enter hex bytes
> > > > > > > > > >>>>> into the test value field.
>
> > > > > > > > > >>>>> Jarrod
>
> > > > > > > > > >>>>> On Jan 19, 3:14 am, Nahshon<spc...@gmail.com>    wrote:
>
> > > > > > > > > >>>>>> Just realiased inserted images do not come up on the newsroup
> > > > > > > > > >>>>>> hear is a link:
>
> > > > > > > > > >>>>>>http://www.vandermehrn.com/lc/feedback/
>
> > > > > > > > > >>>>>> On Jan 18, 3:44 pm, Nahshon Williams<spc...@gmail.com>    wrote:
>
> > > > > > > > > >>>>>>> Adding Feedback todenonsystem
>
> > > > > > > > > >>>>>>> Step one Look at at RS232 protocol spec
> > > > > > > > > >>>>>>> <http://vandermehrn.com/lc/AVCA11SR.pdf>
>
> > > > > > > > > >>>>>>> The example of a command   *<CR>    is the meaning of 0x0D.
> > > > > > > > > >>>>>>>     SIDVD<CR>      :  Select Input source DVD
> > > > > > > > > >>>>>>>     MSTHX SURROUND EX<CR>      :  surround Mode Set to THX SURROUND EX
> > > > > > > > > >>>>>>>     MVUP<CR>      :  Master Volume UP
> > > > > > > > > >>>>>>>     PWON<CR>      :  system PoWer ON
> > > > > > > > > >>>>>>>     PWSTANDBY<CR>      :  system PoWer STANDBY
> > > > > > > > > >>>>>>>     SI?<CR>    : Request command for now playing input source>>    Return
> > > > > > > > > >>>>>>> RESPONSE SI***<CR>
>
> > > > > > > > > >>>>>>> This is great I can change volume and Inputs to the system.
> > > > > > > > > >>>>>>> here is the Protocol for the AVCA11SR:http://vandermehrn.com/lc/AVCA11SR.pdf
>
> > > > > > > > > >>>>>>> What does it say about feedback? Well Page 9 Says:
>
> > > > > > > > > >>>>>>> So I write the REGEX and test it.
>
> > > > > > > > > >>>>>>> the structure is:
>
> > > > > > > > > >>>>>>> MV80\x0D
>
> > > > > > > > > >>>>>>> Here are 2 Regexs that can capture the value:
>
> > > > > > > > > >>>>>>> ^MV(\d{1,2})\\x0D$
> > > > > > > > > >>>>>>> ^MV(\d*)\\x0D$
> > > > > > > > > >>>>>>> Both give me a capture of 80
>
> > > > > > > > > >>>>>>> So now I enter the FEEDBACK and the ANALOG JOINS (see combined image below)
>
> > > > > > > > > >>>>>>> When I change the volume MVUP\x0D or MVDown\x0D
>
> > > > > > > > > >>>>>>> Nothing happens to the guage.
>
> > > > > > > > > >>>>>>> What am I missing guys?
>
> > > > > > > > > >>>>>>> I have been trying feedback for days following my RS232 post.
> > > > > > > > > >>>>>>> Look at the indignity of two buttons for Screen up and Screen Down. and
> > > > > > > > > >>>>>>> Projector On and Projector Off.
>
> > > > > > > > > >>>>>>> Fiasco has a great work around I cannot use for adding 2 commands to a
> > > > > > > > > >>>>>>> button. (it needs feedback)
> > > > > > > > > >>>>>>> I am reading the manual
>
> ...
>
> plus de détails »

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.