Re: Trouble Uploading GUI to iPod Touch

Hi Howard,

Your settings show that you are using the same IP and port for both
the upload service in guiDesigner and the EventGhost plugin.
These are two very different things and will cause conflicts if you
set the same port details.

Please change the EventGhost port to 8020 (I believe that is the
default number in our examples) and set the Project Properties to port
8020 also.
This is the connection for control and feedback, whilst the
guiDesigner Upload Service is just for uploading the GUI.

Jarrod

On Feb 27, 7:58 am, Howard <hdjohnso...@gmail.com> wrote:
> I need some help with uploading the GUI to my iPod Touch.
>
>  My HTPC is connected via serial ports to a Denon 3805 AVR and a
> Directv HR-21. I can control these devices using EventGhost.
>
> I have added the CommandFusion plugin to EG and installed guiDesigner
> on my HTPC and have uploaded the example.gui and the free.gui to my
> iPod Touch. I successfully used the iPod Touch to generate events in
> EG and connected these events to macros to successfully control the
> Denon and the DTV.
>
> I am now trying to get feedback from these devices to the iPod Touch,
> but, I am now having difficulty uploading the GUI. I have obviously
> changed something in the process of working on the feedback, but I can
> not figure out what it is. It must be something simple which should be
> obvious, but I have spent several hours with no success.
>
> I am using the settings below. I get a message on the Touch "Can't
> read GUI file at http//192.168.1.9:8019" and the EG log shows "
> CommandFusion connection lost".
>
> CF Plugin in EG
>       Port = 8019
>
> Project Properties:
>       IP =  192.168.1.9:8019
>       Connection Join = 0
>       Enable Debug Mode = checked
>
> Upload Service
>       Port 8019
>       Set GUI URL to: 192.168.1.9:8019
>
> iPod
>       File URL: 192.168.1.9:8019
>       Reload GUI file - ON
>       Remember Last GUI = OFF
>       Preload Images = ON
>
> Howard

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.