Re: Video for RS232 or any relevant documentation

To send the slider value in a command, simply use [sliderval], eg:
MV[sliderval]\x0A\x0D

The [sliderval] will then automatically be replaced by the actual
slider value, accounting for the slider min/max settings, and the
option of sending hex byte, hex string or decimal value (selectable in
slider properties).

See our wiki for more info and examples:
http://www.commandfusion.com/wiki/index.php?title=GuiDesigner:System_Manager:Commands

Jarrod

On Dec 31 2009, 6:05 am, Fiasco <dgvoll...@gmail.com> wrote:
> No you are still doing a bidirectional update w/ regex.
>
> You send the volume command to the Denon from your ipod
>
> Slider sends command of
> MV##\x0A\x0D (where XX is a value from 00 to 99 for volume)
> or
> MVUP\x0A\x0D (turn volume up)
> MVDOWN\x0A\x0D (turn volume down)
>
> Denon receiver echos back volume state (via globalcache unit)
> MV## (where XX is a value from 00 to 99 for volume)
>
> Use a regexp in Command fusion to capture the value of the volume
> feedback from the Denon receiver to update the correct serial join for
> your volume slider
> MV(.*)
>
> On Dec 30, 10:02 am, Nahshon Williams <spc...@gmail.com> wrote:
>
>
>
> > So what you are saying is have a master slave relationship. Ipod gives
> > values of volume to denon device, device complies as opposed to bi
> > directional updates with regex??
>
> > Fiasco wrote:
> > > My question about that would be not updating the volume slider w/ a
> > > regex as I've been doing that but passing the value of the slider as
> > > the "command value" when the volume slider changes.
>
> > > On Dec 29, 3:44 pm, Jarrod Bell <jar...@guilink.com> wrote:
>
> > >> Fiasco's method of showing/hiding subpages on top of a button to give
> > >> the option of two different commands is a very nice solution. I would
> > >> definitely give that a try anyone who needs to send a different
> > >> command from a single button on every other press.
>
> > >> For grabbing the volume into a slider its as simple as creating a
> > >> regex to grab the volume level and then setting the min and max ranges
> > >> for the value. Then assign the captured value to an analog join and
> > >> use the same join on a gauge or slider and it will update with the
> > >> volume level direct feedback from the receiver.
>
> > >> Jarrod
>
> > >> On Dec 30, 3:52 am, Fiasco <dgvoll...@gmail.com> wrote:
>
> > >>> Ouch, that hurts (the socket lockout you mention) and the single
> > >>> concurrent connection.   Glad to know that
> > >>> before I run into it.
>
> > >>> On Dec 29, 10:39 am, xAPPO <thor...@gmail.com> wrote:
>
> > >>>> I didn't look up the specific Denon model you are controlling but I
> > >>>> have my system integrated via a AVR-4306 which has inbuilt Ethernet -
> > >>>> regardless the RS232 and TCP socket protocol are much the same.  One
> > >>>> awkward thing about the Denon via TCP is that if a socket is kept open
> > >>>> it can get locked out for some reason, and if this happens it can't
> > >>>> reconnect. Only one concurrent connection is supported and so it
> > >>>> requires that the Denon be power cycled to reset the socket.
>
> > >>>> Because of this you have to make a choice of either a permanent open
> > >>>> socket in which case you get real time event information from the
> > >>>> Denon or an open/close socket approach which avoids the lockouts but
> > >>>> compromises the event information .  The latter then requires a few
> > >>>> exchanges each connection to recover state information - or a scape
> > >>>> from the inbuilt web page.
>
> > >>>>    K- Hide quoted text -
>
> > >> - Show quoted text -
>
> > > --
>
> > > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > > To post to this group, send email to commandfusion@googlegroups.com.
> > > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.-Hide quoted text -
>
> > - Show quoted text -

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.