Tuesday, December 29, 2009

Re: Video for RS232 or any relevant documentation

0 comments
I can say without a doubt that you can get two way communication with
your Denon Receiver if it has a serial port.

I just setup a house w/ command fusion remote that has two Denon
receivers and the remote provides visual feedback
including volume, power state, listening mode, sleep timer, mute state
and input state.


On Dec 28, 5:25 pm, Jarrod Bell <jar...@guilink.com> wrote:
> When controlling serial devices, you need to create a new system in
> your project which has connection details relevant to the GC-100
> serial port you are using.
> Each serial port has a different TCP port. Then the command you send
> is exactly as the Denon device requires (no need to add any extra info
> to the command as the GC-100 serial ports are just pass through
> ports).
>
> For parsing feedback, please see the examples in our wiki -www.commandfusion.com/wiki
> You should be able to parse the feedback easily from Denon devices (if
> I recall, been a while since I worked with one).
>
> You cannot send two different commands from a button. We will be
> eventually adding the ability to send different commands on press and
> release, but not different commands toggled by each press (at least
> not immediately anyway).
> You might also want to check if the projector you are using is able to
> control the screen automatically (if thats what you meant by 'screen'
> - most projectors these days have outputs for screen control).
>
> Jarrod
>
> On Dec 29, 6:56 am, Nahshon Williams <spc...@gmail.com> wrote:
>
>
>
> > Hello all,
> > I have a working IR and Relay set up thanks to the video on your blog.
> > (the relay was easy)
> > We would like to use the serial port for communication with the denon in
> > this rig:www.vandermehrn.com/lc
> > Need to get 2 way feedback so that one can see current volume and so on.
> > Is this possible? Are there any example gui files out there? (fully
> > populated remote that uses all hardware features of gc100)
>
> > Also
> > As I am using the relay for a sompfy screen I need to create a screen up
> > and screen down button.
> > Is there a way I can do this with just on button which closes the switch
> > on toggle and closes another switch on release?
> > In other words can I have independent commands on toggle and release?
>
> > Using the following
> > GC100-12
> > Conrolfx and Iviewer 2.2
> > Ipod Touch
>
> > P.S. any pointers would be very much appreciated . . .- Hide quoted text -
>
> - Show quoted text -

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.

Comments

0 comments to "Re: Video for RS232 or any relevant documentation"

Post a Comment

 

Copyright 2008 All Rights Reserved Revolution Two Church theme by Brian Gardner Converted into Blogger Template by Bloganol dot com