Re: Crestron Module for Frmwr 3

Would try working with frmwr 4 and see if it seems stable. Else will
try and edit the module and keep you posted

Thanks

Rajiv
On Aug 13, 7:07 pm, Jarrod Bell <jar...@guilink.com> wrote:
> Our testing did not show this problem on release. We only support
> firmware 4+ now. Have you tried the latest firmware recently? First
> few releases of firmware 4 for Crestron was buggy, but they seem to
> have fixed a lot as of late.
> Perhaps you can edit the module and make it work how you like. It's
> open source after all.
>
> Jarrod
>
> On Aug 14, 12:03 am, Rajiv JAIN <rajivjai...@gmail.com> wrote:
>
>
>
> > Hi Jarrod
>
> > due to numerous problems that we face with frmwr 4 of Crestron we have
> > decided to stick to firmware 3 on the processors.
>
> > With the cf module for frmwr 3 I am noticing an issue of connection
> > and disconnection back. Even if there is no activity for the required
> > time let's say 15 sec the activity timeout signal does not go high and
> > thus the connection reconnection does not happen.
>
> > Could you please look into the module and guide.
>
> > Rajiv

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.