Re: Crestron Module for Frmwr 3

Our testing did not show this problem on release. We only support
firmware 4+ now. Have you tried the latest firmware recently? First
few releases of firmware 4 for Crestron was buggy, but they seem to
have fixed a lot as of late.
Perhaps you can edit the module and make it work how you like. It's
open source after all.

Jarrod

On Aug 14, 12:03 am, Rajiv JAIN <rajivjai...@gmail.com> wrote:
> Hi Jarrod
>
> due to numerous problems that we face with frmwr 4 of Crestron we have
> decided to stick to firmware 3 on the processors.
>
> With the cf module for frmwr 3 I am noticing an issue of connection
> and disconnection back. Even if there is no activity for the required
> time let's say 15 sec the activity timeout signal does not go high and
> thus the connection reconnection does not happen.
>
> Could you please look into the module and guide.
>
> Rajiv

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.