Push:Release

Hi

Push
Release

I can do with this version??

For example. (LiteTouch Protocol)

For Push: " 01 04-6 \x0D"
For Release: " 02 04-6 \x0D"

When I press once Light ON
When I press the light off again

but I can not press the button

Command Overview:
00) Switch Push and Release:
This command will "push and release" a single switch on a
specified control station.
OPTIONS: None
RESPONSE: None
EXAMPLE: " 00 FA-7 ↵ " (Push and release switch 7 of control
station FA)
01) Switch Push:
This command will "push, but not release" a single switch on a
specified control station. (Many system functions, such as LED
updates and some dimming operations, are queued on switch
release. Therefore, if this command is used, without a
corresponding switch release, proper LED operation and load
dimming cannot be guaranteed.
Dimming is accomplished by sending two consecutive switch
pushes. The switch release command stops dimming.
OPTIONS: None
RESPONSE: None
EXAMPLE: " 01 54-2 ↵ " (Push switch 2 of control station 54.)
02) Switch Release:
This command will "release" a single pushed switch on a specified
control station. (This command may affect some aspects of system
operation if it is used on a switch that is not pushed.)
OPTIONS: None
RESPONSE: None
EXAMPLE: " 02 1A-9 ↵ " (Release switch 9 of control station 1A.)

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.