Re: Multiple Global Cache Devices

Sometimes it also depends on the router in my case I have a d-link DIR-600.
Works perfect, even to use iViewer from the internet with the IPAD.

2010/7/19 PauloJr <paulo.kagohara@gmail.com>

Wow,

Will try to do it, but do you know any reason for that to happen?

PJ

On 19 jul, 11:44, Deiby Rojas <moncor...@gmail.com> wrote:
> Happened to me the same thing and was solved by changed the ip range
>
> For example.
>
> 192.168.1.10 to change 192.168.1.120
> 192.168.1.11 to change 192.168.1.121 and works perfect I have work 5 global cache devices on  same network.
>
> Enviado desde mi iPad
>

> El 19/07/2010, a las 08:06, PauloJr <paulo.kagoh...@gmail.com> escribió:

>
>
>
> > Hi ,
>
> > Had the exactly same problem, but with two GC-100, both on the same
> > network, connected on the same router. So, a weak WiFi signal is not
> > an issue.
>
> > I have an installation that needs this, because I'll have at least 32
> > IR equipments to control with 3 GC-100-12.
>
> > What's happening?
>
> > PJ
>
> > On 14 jul, 23:33, Jarrod Bell <jar...@guilink.com> wrote:
> >> If you are not using one of the ports (5000) delete it from your
> >> program.
>
> >> Otherwise the only other idea I have is that your networking hardware
> >> is not up to scratch (weak wifi?)
>
> >> Jarrod
>
> >> On Jul 15, 9:49 am, gchts <thebo...@gmail.com> wrote:
>
> >>> No just one iPad
>
> >>> On Jul 14, 12:07 am, Fiasco <dgvoll...@gmail.com> wrote:
>
> >>>> You are not trying to use two control devices w/ the GC-100 are you?
>
> >>>> On Jul 13, 10:14 pm, gchts <thebo...@gmail.com> wrote:
>
> >>>>> I am trying to use a GC-100 and an iTach in the same system.  It seems
> >>>>> like when commands are sent to one system the other system is slow to
> >>>>> take commands.  The iTach in particular seems like it looses
> >>>>> connection with Command Fusion.  When I send various command to it,
> >>>>> things will stop for a few seconds and when it syncs back up all the
> >>>>> commands will catch up all at once.
>
> >>>>> Each system consist of an IP address and a port and I have maintain a
> >>>>> constant connection & TCP on each system.
>
> >>>>> GC-100
> >>>>> System 1 IR & Relay outputs 192.168.1.18 port 4998  EOM \x0D
> >>>>> System 2 Serial Port 1 192.168.1.18 port 4999  EOM \x0A
> >>>>> System 3 Serial Port 2 192.168.1.18 port 5000 (not using)
>
> >>>>> Itach
> >>>>> System 4 IR outputs 192.168.1.19 port 4998  EOM \x0D
>
> >>>>> Has anyone experienced this problem?
>
> >>>>> Thanks,
> >>>>> Brian- Ocultar texto das mensagens anteriores -
>
> >> - Mostrar texto das mensagens anteriores -
>
> > --
> > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.

> > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.- Ocultar texto das mensagens anteriores -

>
> - Mostrar texto das mensagens anteriores -

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.

--
Deiby Rojas Montero
Moncortec S.A.

Tel: 2263.6052
Cel: 8374.5853

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.