I have had issues with some brands that simply will not be learnt (even
though the capture seems successful)
I even bought bobby remote hoping to be able to extract the codes . . .
Do you know if anyone else has this model working on the GC100 via IR?
Does the unit have an RS232 control port?
Nahshon
On 01/07/2010 13:53, Sound_And_Vision wrote:
> For the ir input to work you need a xantech module to convert the ir
> signals.
> i dont know what the modfel number is, im shure its on their website
>
>
>
> On 30 jun, 08:36, Marc-Etienne HUNEAU<m...@dsr.fr> wrote:
>
>> If I remember right, the IR receiver is on the opposite side from the power leds.
>>
>> I would triple check that first. Use a flashlight and find the opening in the plastic, you should be able to see it.
>>
>> That having been said, why not choose RS232 instead ? It would save the trouble of having an IR blaster glued to such a nice TV set...
>>
>> Le 29 juin 2010 à 13:19, deciBel a écrit :
>>
>>
>>
>>
>>> Hello
>>>
>>
>>> I've sendt Global Cache a support request as well, but why not ask you
>>> guys too...
>>>
>>
>>> Im trying to control a Pioneer KURO LX5090H TV, from a GC-100-18 using
>>> the IR emitters that came with the controller. Its a fresh, reset`ed
>>> controller. I've learned the IR, several times (with different
>>> settings.), and I've tested different positions for the emitter, but
>>> the TV doesn't obey at all.
>>>
>>
>>> All other IR to other components work fine. (and Ive also swapped
>>> ports)
>>>
>>
>>> I think that its something to do with the learning that makes my IR
>>> not perfect. The GC controller seems to process the IR correctly.
>>>
>>
>>> Anyone here that might have had the same trouble?
>>>
>>
>>> Regards
>>>
>>
>>> Even
>>>
>>
>>> --
>>> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
>>> To post to this group, send email to commandfusion@googlegroups.com.
>>> To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
>>> For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
>>>
>> --
>> Marc-Etienne HUNEAU Dark Side of the Room (DSR)
>> +33 (0)6 615 516 90 http://www.dsr.fr
>>
>
--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.
Comments
0 comments to "Re: Global Cache and Pioneer LX5090H - IR trouble"
Post a Comment