Re: button change state

Also did you escape any characters to test your regex? If so did you remember to remove them in feedback manager?
As you can see from the image the joins go from 901 to 912 so I also kept a sequence.

On 7/20/2010 9:54 PM, Nahshon Williams wrote:

Hmmm. . .
Need more info.

I assume you are using a different protocol to the wiki example, if so please post the regex and response you are expecting/getting.

At present I have an onkyo on this "either or" function based on frequency matches.
Here is how I got mine to work:

Ecpected Data when station changed or queried from Onkyo: ISCP!1TUN08880
Regex: .*!1TUN(09850)?(08880)?(09130)?(09350)?(10490)?(09490)?(10620)?(10090)?(10220)?(10540)?(09730)?(09580)?.*

Too lazy to type the rest so here is an image:
http://vandermehrn.com/lc/onkyo/WhichStation.png

What the image shows is the different capture groups and relevant station.
Here you can see BBC Radio 2 is on the frequency above.
They are digital joins and there is no off value.
Simulate feedback is switched off (as this is the real deal)

hope this helps. . .
Nahshon







On 7/20/2010 9:14 PM, Waldy,,,, Liverpool Uk wrote:

Hi Nashon,  Have finally got around to setting this up and have come up with a problem.  I have the digital joins set for 5 preset radio stations, the join no's are 950-954. i used this range as I am trying to keep pages in sequence.  I have followed the instructions and when I do the regex test the join number picks out the correct group. However nothing now happens when I press the button. It does not even execute the command to pick the radio channel.  Any idea what could be wrong  thanks  Waldy