Re: RS232 receiving data

Thanks
My GC100 is working fine on my system. I`m also controllig some stuff
via RS232. I want to know if I can read the port 4999 0r 5000 with
iViewer and display the data on the iphone

Thanks

On 28 mayo, 19:19, Nahshon Williams <spc...@gmail.com> wrote:
> Leandro
> You need to know what protocol your device uses? Who is the manufacturer?
> The GC 100 serial (rs232) works with the following ports: 4999 and Port
> 5000 TCP Only
> You need to create a new system and create commands (based on the protocol).
> Let me know if you need further help. . .
>
> You need the following to be working in the correct order
> 0)Do you have the serial protocol of your device?
> 1) Do you have the right serial cable? (is the pin out correct?)
> 2)Have you configured the GC100 with the correct port settings? (do you
> have the right baud rates?)
> 3)Have you imported the plugin for the GC100 into Gui Designer?
> 4)Have you used the correct EOM character for feedback? (in system
> properties)
> 5)Have you terminated your command with the correct character? eg \x0D
> or \x0A or any other terminator as specified by the protocol.
> 6)Is your router configured to work with the GC100 (does the light
> flicker when you press a button? are you on the same subnet as the GC100?)
>
> Nahshon
>
> On 28/05/2010 20:50, Leandro wrote:
>
> > Hi everybody. I`m new on this. Can anyone help me and tell me how can
> > I do to receive data from a 232 port on GC-100 and display that on an
> > iphone.
>
> > Thanks
>
> > Leandro

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.