RE: Problem with subpage with version 3.3

I mean the subpage join is triggered by a digital feedback coming from your Crestron v4.2 module.

 

Here is an example subpage ref. props.:

 

I modified the program to remove the control system and use simulated logic to show the subpage. The tabs on the top are the buttons. The behavior is the same, the subpage shows up once then no more. You can download the zip here: http://jwmelvin.no-ip.org:8080/ipod/ipod-test.zip

 

And, as Justin just posted, switching pages seems to reset the behavior and allow the subpage to show one more time.

 

-----Original Message-----
From: commandfusion@googlegroups.com [mailto:commandfusion@googlegroups.com] On Behalf Of Jarrod Bell
Sent: Friday, April 02, 2010 7:51 PM
To: CommandFusion
Subject: Re: Problem with subpage with version 3.3

 

Jason: You mentioned it was being triggered by feedback processing,

but you don't have any external systems defined in your GUI. Do you

mean triggered via our built in protocol (ie. connection using the

Project Properties control system details)?

 

In any case, can you please take a screenshot of the subpage reference

properties for one of the subpages that is not working? Or simply type

out the value of each property on that dialog.

 

I cannot test with your GUI file as the control system connection is

set to your local address. If you could create a new gui project with

just enough in it to reproduce the problem (along with any images

used, all zipped up) that would go a long way for us to test.

 

Jarrod

 

On Apr 3, 10:41 am, Jason Melvin <jwmel...@gmail.com> wrote:

> I am triggering via feedback processing triggering a digital join. The

> same feedback is holding down buttons but not showing the subpage.

> 

> You can access my project here:http://jwmelvin.no-ip.org:8080/ipod/test_2.gui

> 

> 

> 

> On Fri, Apr 2, 2010 at 7:22 PM, Jarrod Bell <jar...@guilink.com> wrote:

> > And how are you triggering the subpage to show? Via the built in

> > protocol? Via a button set to simulate toggle mode? Or via feedback

> > processing triggering a digital join?

 

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.

To post to this group, send email to commandfusion@googlegroups.com.

To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.