Re: Connection iPhone to AMX NI-700

a

On 12 bře, 13:54, Patrick <val...@gmail.com> wrote:
> then you don't have compiled the source code and upload it to the
> master.....
>
> 2010/3/12 cezetko <michal.lis...@gmail.com>
>
>
>
> >http://192.168.1.83/free.guiis working, I see here: iViewer GuiLink
> > 192.168.1.83 8020 3E65F6D967791825093DE3F74990B1D6 and picture names.
> > Telnet connection on 192.168.1.83:8020 is working too.
>
> > But in Online tree a see only: NI Master, NI-700 and NSX aplication.
> > Nothing virtual device...
>
> > On 12 bře, 13:30, Patrick <val...@gmail.com> wrote:
> > > i have under DOC:User make a own Folder for my gui file. it works
> > perfectly.
> > > make also the correct path on the amx module!
> > > the amx code must can read the gui file
>
> > > this can take some minutes after reboot the master. after that you can
> > make
> > > a test connecten by telnet.
>
> > > make a telnet connecten to the master on the specified IP-Port (you
> > > specified in the iViewer Designer). Is the connection working, the next
> > step
> > > is to connect with the iphone.
>
> > > 2010/3/12 cezetko <michal.lis...@gmail.com>
>
> > > > Maybe is problem with wrong upload to Master.
> > > > What is the procedure for uploading files to the root?
>
> > > > I have my free.gui under under "DOC:USER", but in other thread is
> > > > write:
>
> > > > Use any FTP application to connect to the AMX Master.
>
> > > > The standard login is:
> > > > User: administrator
> > > > Pass: password
>
> > > > Be sure to put the file in the root folder of the AMX master, not
> > > > under "DOC:USER".
>
> > > > I typically user a higher TCP Port such as 10001, though this is not
> > > > a
> > > > requirement for the module.
>
> > > > (writed here:
> > > >http://groups.google.com/group/commandfusion/msg/98ce6cb9bdabeeff?dmo..
> > .)
>
> > > > On 12 bře, 12:21, Patrick <val...@gmail.com> wrote:
> > > > > you dont's see the iPhone in the online Tree! Only the virtual
> > device!
>
> > > > > 2010/3/12 cezetko <michal.lis...@gmail.com>
>
> > > > > > Yes, GUI is for iPhone. I have AMX plugin in NI700, where is
> > comment:
> > > > > > (*
> > > > > > How To Use:
>
> > > > > > YOU MUST UPLOAD YOUR .GUI FILE, GENERATED FROM GUIDESIGNER, ONTO
> > YOUR
> > > > > > NELINX MASTER BEFORE LOADING THIS MODULE.
>
> > > > > > When the Netlinx Master reboots, it will read, line by line, the
> > .GUI
> > > > > > file to gather the following information:
>
> > > > > > - Project File Name.
> > > > > > - Designer's Name.
> > > > > > - IP Address that the iViewer will be connecting to.
> > > > > > - The TCP Port (This will be use when the master opens that port.)
> > > > > > - Page Name And Join Number.
> > > > > > - Bargraph settings (min and max level) (!!Pargraphs with the same
> > > > > > level code have to have the same settings!!)
>
> > > > > > After this is complete, the master will open the TCP Port to allow
> > > > > > your iViewer to connect.
>
> > > > > > Note: This parsing can take a couple of minutes in this current
> > > > > > version of this module.
>
> > > > > > *)
>
> > > > > > But iphone isn't in online-tree, after upload gui file to NI700,
> > > > > > compile and run project.
>
> > > > > > On 12 bře, 11:49, Nahshon Williams <spc...@gmail.com> wrote:
> > > > > > > The GUI file is for the iPhone only!
> > > > > > > This is the free file you uploaded to the iPhone via Gui Designer
> > or
> > > > a
> > > > > > > web server.
> > > > > > > I am not AMX friendly but I think you need to get the AMX plugin.
> > > > > > > Search for AMX in the google group. Also look at
> > > > commandfusion.com/wiki
>
> > > > > > > In Gui Designer you need to go to Edit>Project Properties to
> > specify
> > > > > > > your control system.
>
> > > > > > > On 12/03/2010 10:03, cezetko wrote:
>
> > > > > > > > Hallo,
> > > > > > > > I have problem with connection iPhone to NI700. In Iphone I
> > have
> > > > > > > > uploaded free.gui. But I can't connect iphone to NI700. What
> > does
> > > > it
> > > > > > > > mean: YOU MUST UPLOAD YOUR .GUI FILE? I uploaded free.gui to
> > NI700
> > > > via
> > > > > > > > FTP.
>
> > > > > > > > In online tree I haven't some virtual device.
>
> > > > > > > > Thank you for help- Skrýt citovaný text -
>
> > > > > > > - Zobrazit citovaný text -
>
> > > > > > --
> > > > > > You received this message because you are subscribed to the Google
> > > > Groups
> > > > > > "CommandFusion" group.
> > > > > > To post to this group, send email to
> > commandfusion@googlegroups.com.
> > > > > > To unsubscribe from this group, send email to
> > > > > > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog-legroups.com>
> > <commandfusion%2Bunsubscr...@goog-legroups.com<commandfusion%252Bunsubscr...@goog-legroups.com>
>
> > > > <commandfusion%2Bunsubscr...@goog-legroups.com<commandfusion%252Bunsubscr...@goog-legroups.com>
> > <commandfusion%252Bunsubscr...@goog-legroups.com<commandfusion%25252Bunsubscr...@goog-legroups.com>
>
> > > > > > .
> > > > > > For more options, visit this group at
> > > > > >http://groups.google.com/group/commandfusion?hl=en.-Skrýt<http://groups.google.com/group/commandfusion?hl=en.-Skr%C3%BDt>citovaný
> > > > text -
>
> > > > > - Zobrazit citovaný text -
>
> > > > --
> > > > You received this message because you are subscribed to the Google
> > Groups
> > > > "CommandFusion" group.
> > > > To post to this group, send email to commandfusion@googlegroups.com.
> > > > To unsubscribe from this group, send email to
> > > > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog-legroups.com>
> > <commandfusion%2Bunsubscr...@goog-legroups.com<commandfusion%252Bunsubscr...@goog-legroups.com>
>
> > > > .
> > > > For more options, visit this group at
> > > >http://groups.google.com/group/commandfusion?hl=en.-Skrýt citovaný
> > text -
>
> > > - Zobrazit citovaný text -
>
> > --
> > You received this message because you are subscribed to the Google Groups
> > "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to
> > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscribe@goog-legroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/commandfusion?hl=en.- Skrýt citovaný text -
>
> - Zobrazit citovaný text -

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.