requirements.
The code is fully editable, so perhaps trying it out and figuring out
where the issue lies then people could help more?
So far you haven't given us much to go on.
What exactly are you doing (step by step) and what is happening?
Jarrod
On Mar 13, 1:44 am, cezetko <michal.lis...@gmail.com> wrote:
> I have compiled and uploaded in the master this source code:http://commandfusion.googlegroups.com/web/AMX_Module_REV02.zip
> Is this sourcecode corrected?
>
> Thank you for help
>
>
>
> > then you don't have compiled the source code and upload it to the
> > master.....
>
> > 2010/3/12 cezetko <michal.lis...@gmail.com>
>
> > >http://192.168.1.83/free.guiisworking, I see here: iViewer GuiLink
> > > 192.168.1.83 8020 3E65F6D967791825093DE3F74990B1D6 and picture names.
> > > Telnet connection on 192.168.1.83:8020 is working too.
>
> > > But in Online tree a see only: NI Master, NI-700 and NSX aplication.
> > > Nothing virtual device...
>
> > > On 12 bře, 13:30, Patrick <val...@gmail.com> wrote:
> > > > i have under DOC:User make a own Folder for my gui file. it works
> > > perfectly.
> > > > make also the correct path on the amx module!
> > > > the amx code must can read the gui file
>
> > > > this can take some minutes after reboot the master. after that you can
> > > make
> > > > a test connecten by telnet.
>
> > > > make a telnet connecten to the master on the specified IP-Port (you
> > > > specified in the iViewer Designer). Is the connection working, the next
> > > step
> > > > is to connect with the iphone.
>
> > > > 2010/3/12 cezetko <michal.lis...@gmail.com>
>
> > > > > Maybe is problem with wrong upload to Master.
> > > > > What is the procedure for uploading files to the root?
>
> > > > > I have my free.gui under under "DOC:USER", but in other thread is
> > > > > write:
>
> > > > > Use any FTP application to connect to the AMX Master.
>
> > > > > The standard login is:
> > > > > User: administrator
> > > > > Pass: password
>
> > > > > Be sure to put the file in the root folder of the AMX master, not
> > > > > under "DOC:USER".
>
> > > > > I typically user a higher TCP Port such as 10001, though this is not
> > > > > a
> > > > > requirement for the module.
>
> > > > > (writed here:
> > > > >http://groups.google.com/group/commandfusion/msg/98ce6cb9bdabeeff?dmo..
> > > .)
>
> > > > > On 12 bře, 12:21, Patrick <val...@gmail.com> wrote:
> > > > > > you dont's see the iPhone in the online Tree! Only the virtual
> > > device!
>
> > > > > > 2010/3/12 cezetko <michal.lis...@gmail.com>
>
> > > > > > > Yes, GUI is for iPhone. I have AMX plugin in NI700, where is
> > > comment:
> > > > > > > (*
> > > > > > > How To Use:
>
> > > > > > > YOU MUST UPLOAD YOUR .GUI FILE, GENERATED FROM GUIDESIGNER, ONTO
> > > YOUR
> > > > > > > NELINX MASTER BEFORE LOADING THIS MODULE.
>
> > > > > > > When the Netlinx Master reboots, it will read, line by line, the
> > > .GUI
> > > > > > > file to gather the following information:
>
> > > > > > > - Project File Name.
> > > > > > > - Designer's Name.
> > > > > > > - IP Address that the iViewer will be connecting to.
> > > > > > > - The TCP Port (This will be use when the master opens that port.)
> > > > > > > - Page Name And Join Number.
> > > > > > > - Bargraph settings (min and max level) (!!Pargraphs with the same
> > > > > > > level code have to have the same settings!!)
>
> > > > > > > After this is complete, the master will open the TCP Port to allow
> > > > > > > your iViewer to connect.
>
> > > > > > > Note: This parsing can take a couple of minutes in this current
> > > > > > > version of this module.
>
> > > > > > > *)
>
> > > > > > > But iphone isn't in online-tree, after upload gui file to NI700,
> > > > > > > compile and run project.
>
> > > > > > > On 12 bře, 11:49, Nahshon Williams <spc...@gmail.com> wrote:
> > > > > > > > The GUI file is for the iPhone only!
> > > > > > > > This is the free file you uploaded to the iPhone via Gui Designer
> > > or
> > > > > a
> > > > > > > > web server.
> > > > > > > > I am not AMX friendly but I think you need to get the AMX plugin.
> > > > > > > > Search for AMX in the google group. Also look at
> > > > > commandfusion.com/wiki
>
> > > > > > > > In Gui Designer you need to go to Edit>Project Properties to
> > > specify
> > > > > > > > your control system.
>
> > > > > > > > On 12/03/2010 10:03, cezetko wrote:
>
> > > > > > > > > Hallo,
> > > > > > > > > I have problem with connection iPhone to NI700. In Iphone I
> > > have
> > > > > > > > > uploaded free.gui. But I can't connect iphone to NI700. What
> > > does
> > > > > it
> > > > > > > > > mean: YOU MUST UPLOAD YOUR .GUI FILE? I uploaded free.gui to
> > > NI700
> > > > > via
> > > > > > > > > FTP.
>
> > > > > > > > > In online tree I haven't some virtual device.
>
> > > > > > > > > Thank you for help- Skrýt citovaný text -
>
> > > > > > > > - Zobrazit citovaný text -
>
> > > > > > > --
> > > > > > > You received this message because you are subscribed to the Google
> > > > > Groups
> > > > > > > "CommandFusion" group.
> > > > > > > To post to this group, send email to
> > > commandfusion@googlegroups.com.
> > > > > > > To unsubscribe from this group, send email to
> > > > > > > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscr...@goog-legroups.com>
> > > <commandfusion%2Bunsubscr...@goog-legroups.com<commandfusion%252Bunsubscr...@goog-legroups.com>
>
> > > > > <commandfusion%2Bunsubscr...@goog-legroups.com<commandfusion%252Bunsubscr...@goog-legroups.com>
> > > <commandfusion%252Bunsubscr...@goog-legroups.com<commandfusion%25252Bunsubscr...@goog-legroups.com>
>
> > > > > > > .
> > > > > > > For more options, visit this group at
> > > > > > >http://groups.google.com/group/commandfusion?hl=en.-Skrýt<http://groups.google.com/group/commandfusion?hl=en.-Skr%C3%BDt>citovaný
> > > > > text -
>
> > > > > > - Zobrazit citovaný text -
>
> > > > > --
> > > > > You received this message because you are subscribed to the Google
> > > Groups
> > > > > "CommandFusion" group.
> > > > > To post to this group, send email to commandfusion@googlegroups.com.
> > > > > To unsubscribe from this group, send email to
> > > > > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscr...@goog-legroups.com>
> > > <commandfusion%2Bunsubscr...@goog-legroups.com<commandfusion%252Bunsubscr...@goog-legroups.com>
>
> > > > > .
> > > > > For more options, visit this group at
> > > > >http://groups.google.com/group/commandfusion?hl=en.-Skrýt citovaný
> > > text -
>
> > > > - Zobrazit citovaný text -
>
> > > --
> > > You received this message because you are subscribed to the Google Groups
> > > "CommandFusion" group.
> > > To post to this group, send email to commandfusion@googlegroups.com.
> > > To unsubscribe from this group, send email to
> > > commandfusion+unsubscribe@googlegroups.com<commandfusion%2Bunsubscr...@goog-legroups.com>
> > > .
> > > For more options, visit this group at
> > >http://groups.google.com/group/commandfusion?hl=en.-Skrýt citovaný text -
>
> > - Zobrazit citovaný text -
--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.
Comments
0 comments to "Re: Connection iPhone to AMX NI-700"
Post a Comment