Re: Add Slider value to command?

Thanks got it working. The dimming sliders rock!

Whole house lighting with leviton rs232 controller through gc-100 and
iviewer.

On Dec 7, 3:31 am, arfield <rupert.fi...@gmail.com> wrote:
> Hi,
> sorry - panic over!
> It appears to just be a quirk of the device itself - not a problem
> with commandfusion.
> If the device was set to display it's volume in -db, it gets confused
> when sending non db values to it via the slider.
> I've just set the device to display it's volume in 0-99 format instead
> and everything works great.
> Thanks
>
> On Dec 7, 11:00 am, arfield <rupert.fi...@gmail.com> wrote:
>
>
>
> > Hi,
> > I've been trying to get the [sliderval] function to work without
> > success so far - any ideas?
>
> > As an example, I have a slider set to be a volume control.
> > The slider is receiving feedback from a GC-100 via rs232 - which is
> > working fine in realtime - ie if the volume knob is moved on the
> > device, the display updates on the iphone.
>
> > I've also got multiple buttons set up to send commands over rs232 -
> > which also work great.
>
> > However - I've set the 'ondrag' parameter on the slider to be (in
> > command properties)
> > #1,13,[sliderval]\x0D
> > but nothing happens - in fact, nothing happens even if I set that
> > command on 'on click' or 'on release' either.
>
> > I know that particular command functions correctly however - as if I
> > set the command for a button to
> > #1,13,10\x0D (for example)
> > then it sets the volume to 10 on the device perfectly fine.
>
> > Some misc details
> > I've got it set as an analog join, with indicator values from -96 to
> > -1 (the device works in -db values) - but I've also tried setting it
> > as 0 to 100 with the same result.
>
> > Slide value is set to 'dec' - and I've tried also disabling the
> > 'simulate feedback' tick to see if that would help (it didn't).
>
> > R
>
> > On Dec 7, 10:39 am, Jarrod Bell <jar...@guilink.com> wrote:
>
> > > Hi Henry,
>
> > > Please see our wiki which outlines the requirements and features of
> > > sending commands on slider/press/release.
>
> > >http://www.commandfusion.com/wiki/index.php?title=GuiDesigner:System_...
>
> > > Basically, insert the text [sliderval] where you want the slider value
> > > to be sent in the command.
>
> > > Jarrod
>
> > > Henry Rico wrote:
> > > > How do I add the slider value to this command when slider is set to on
> > > > drag?
>
> > > >> N6L50UP \x0D
>
> > > > So he command would be
>
> > > >> N6L10UP \x0D
>
> > > > or  >N6L75UP \x0D
> > > > depending on slider value.
>
> > > > Thanks,
> > > > Henry
>
> > > > --
>
> > > > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > > > To post to this group, send email to commandfusion@googlegroups.com.
> > > > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > > > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.