Re: sending rs232 commands?

Yes just create 2 different systems in guiDesigner system manager,
each using the different TCP port.
The port is defined separately to the IP address within the System
Properties. Just make the destination and origin ports the same within
each system.
So if sending to serial port 1, then make the ports 4999 in the System
properties.

Jarrod

On Nov 16, 9:16 pm, amadcitrus <amadcit...@gmail.com> wrote:
> Hi Jarrod, thanks for the reply, i thought as much about it simply
> passing commands -
>
> the key is the TCP port connection - how is this physically done
> within GuiDesigner when i'm creating a command for a button? do I
> create 2 new systems with the globalcache's IP, but with ':4999' and ':
> 5000' on the end for the 2 serial ports?
>
> Kind regards, yor help is much appreciated.
>
> Adam.
>
> On Nov 14, 1:46 am, Jarrod Bell <jar...@guilink.com> wrote:
>
>
>
> > Hi Adam,
>
> > With the GC-100, whatever commands you send through to the serial port
> > are passed through directly to the end device.
> > So there is nothing you need to add to the commands, just the commands
> > that the device you are controlling actually expect.
>
> > Just remember to connect to the correct TCP port of the GC-100. Serial
> > port one is TCP port 4999, serial port 2 (if using GC-100-12 or above)
> > is TCP port 5000.
>
> > Jarrod
>
> > On Nov 14, 3:07 am, amadcitrus <amadcit...@gmail.com> wrote:
>
> > > Hi,
>
> > > (Thanks for your earlier reply about the IR Jarrod)
>
> > > I've got a question about RS232 using a GC100-12, should the wizard in
> > > CF generate the correct format? i.e the 'header' part of the string?
> > > (given that you have to select which serial port you are sending
> > > from).
>
> > > Does anyone have an example rs-232 string (for any device)
> > > successfully used with the GC100?
> > > In this instance I am attempting to send some Rako lighting commands
> > > out of serial port 1, the string would be ho:24 ro:8 sc:4\x0D (house
> > > number 24, room 8, lighting scene 4)
>
> > > am i on the right track here.....?
>
> > > thanks in advance,
> > > Adam

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=.