Re: kaleidescape TCP/IP control

Thanks ever so much guys,
line return and carriage return together did it!

cheers,
Adam

On Nov 16, 10:08 pm, Jarrod Bell <jar...@guilink.com> wrote:
> The EOM is only for parsing feedback, it does not apply itself to
> outgoing commands. Please see our wiki for documentation in this area.http://www.commandfusion.com/wiki/index.php?title=GuiDesigner:System_...
>
> I would try Fiasco's suggestion of adding a line feed and carriage
> return to the end of the commands (these are added by default in
> telnet when you press enter to send the command). You might even only
> need a carriage return, depending on the protocol.
>
> Heartbeats are only required if the system you are controlling
> requires a heartbeat message to keep a connection alive. Most systems
> do not need this. But you can also use the heartbeat Tx as a way to
> poll the system for data by sending it a command every 3 seconds.
>
> Jarrod
>
> On Nov 17, 7:06 am, Fiasco <dgvoll...@gmail.com> wrote:
>
> > Try \x0A\x0D
>
> > and send it at the end of every command. Leave the system properties
> > eom blank
>
> > On Nov 16, 9:00 am, amadcitrus <amadcit...@gmail.com> wrote:
>
> > > Hi,
>
> > > Does anyone have experience with the above? I am attempting simple
> > > control of a kaleidescape movie player from a page on our command
> > > fusion gui:
>
> > > So far I have created a new system with the static IP of our player,
> > > the port connections set at 10000 and maintain constant connection is
> > > checked.
>
> > > An example command applied to a button I am using is 01/1/DOWN:
>
> > > I have tried various EOM's, but to no avail. Does anyone have a
> > > definitive EOM that works using this method of controlling the
> > > K'scape? (I should point out that I have control of the player using
> > > hyperterminal, by entering the string above, so the IP address etc..
> > > is definately correct )
>
> > > Do I need to set the heartbeat details?
>
> > > Any help appreciated,
>
> > > Kind regards,
>
> > > Adam

--

You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=.