Re: TOTAL NOOB CANT FIGURE THIS OUT :(

Here is another thread on controlling integras

http://groups.google.com/group/commandfusion/browse_thread/thread/0f7b0c8102b329d3/3a6cee21efe6ff85?show_docid=3a6cee21efe6ff85

On May 7, 6:25 pm, Fiasco <dgvoll...@gmail.com> wrote:
> If you are not using the latest beta download it herehttp://www.commandfusion.com/download/CommandFusion_guiDesigner_Setup...
>
> That way your seeing the same thing I am.
>
> You do not mention a "target type" which would also be serial.  Hex
> should be unchecked (the part you are interested in is the !1PWRXX).
> If both the data type and target type is set to serial you should not
> see options for Min and Max values.
>
> The actual commands you have shouldn't be a concern for you at this
> point I don't think.  If you are successfully connected to your
> receiver manipulating any control on the receiver itself should
> trigger feedback to CF.
>
> On May 7, 1:05 pm, matt formanek <mjforman...@gmail.com> wrote:
>
>
>
>
>
> > Howdy Fiasco, sorry for the late reply, busy trying to drum up
> > business. I am attempting to create the text feedback field that you
> > have described. I got lost when you said "add capture group, set it to
> > capture index one and assign the serial value to the join number of
> > the text field you made" I am confused about what to put in the fields
> > of the "feedback properties" pop-up that opens. The "system" is filled
> > in for me (Integra Receiver 192.168.1.112), feedback name: test,
> > Regex: (.*) just as you listed., Regex capture groups: NOTE: this is
> > where it becomes confusing, from Left to Right: Right Arrow, Name
> > Field: I called it "test", Data Type Field: I selected "Serial" from
> > the drop-down, Join Field: I called it "10" which is the serial join
> > number that I used in the "serial join" field of the Text Properties
> > of the text that I placed on the page GUI, Min Value: "0" is the
> > default, Max Value: "0" is the default, Off Value: "blank", On Value:
> > "blank" and lastly a "check box" for Hex?
> > Is this all correctly filled out? For everyone who is trying to help
> > me here is the exact command string for each of the two commands:
> > Power On:
> > ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR01\x0A\x0D
> > Power Off
> > ISCP\x00\x00\x00\x10\x00\x00\x00\x08\x01\x00\x00\x00!1PWR00\x0A\x0D
> > Any help would be greatly appreciated. Thanks!
>
> > On May 4, 8:49 pm, Fiasco <dgvoll...@gmail.com> wrote:
>
> > > When you send your commands to the Integra are you putting \x0D\x0A
> > > at the end of them (newline, carriagereturn)?
>
> > > On May 4, 3:51 pm, matt formanek <mjforman...@gmail.com> wrote:
>
> > > > HELP! Can anyone send me a basic GUI file that I can compare to what
> > > > I'm doing? I have created the most basic GUI (one page with two
> > > > buttons) Power On and Power Off to try to control an Integra DTR-6.8
> > > > Surround Sound receiver with iViewer loaded on an iTouch. I can talk
> > > > to the receiver fine with telnet, so I know I have the IP addy and the
> > > > default port (60128) correct. BUT, I don't know if I have all of the
> > > > fields filled in properly in GUI Designer. I have spent countless
> > > > hours reading all of the posts and threads on here in hopes I could
> > > > find some "idiot-proof" step-by-step guide to using this software to
> > > > no avail. Jarrod has responded to the two emails I sent, but, I must
> > > > be missing something that is a "no-brainer" to all of you. Please
> > > > help. Thanks.
>
> > > > --
> > > > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > > > To post to this group, send email to commandfusion@googlegroups.com.
> > > > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > > > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
>
> > > --
> > > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > > To post to this group, send email to commandfusion@googlegroups.com.
> > > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.-Hide quoted text -
>
> > - Show quoted text -
>
> --
> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> To post to this group, send email to commandfusion@googlegroups.com.
> To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.- Hide quoted text -
>
> - Show quoted text -

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.