commands are sent the exact same way from our app.
So it must be a problem with either the IR command, the Denon unit,
the GC box, or might even be as simple as incorrect IR emitter
placement or interference from another IR source or reflections.
Jarrod
On May 6, 6:58 am, Brian Lake <brian.e.l...@gmail.com> wrote:
> Tried pronto hex conversion AND learning into iTach learner several
> times. Still no go!
>
> On May 5, 1:26 pm, jimi dennison <sjdenni...@hotmail.com> wrote:
>
>
>
>
>
> > I don't have any experience with that WF2IR device but I have run into
> > cruddy volume commands for a denon receiver. Where are you actually
> > getting the IR code fromi? Is it a pronto format? If so you might be
> > able to learn it in from the actual remote and have better response.
>
> > On May 5, 3:05 pm, Brian Lake <brian.e.l...@gmail.com> wrote:
>
> > > I have a Denon AVR-1507 with no serial port so I have to control via
> > > IR.
> > > Has anyone done this before? I am sending correct commands to a
> > > GlobalCache WF2IR processor and the commands take extremely long to
> > > process for some reason! It takes forever to ramp volume!
> > > I have messed around with the actual IR code, the repeatcount, and set
> > > the repeat delay on the button properties to several values (100, 200,
> > > 500ms). When the delay is set to 100ms and I hold the button down for
> > > a second, it slowly sends out the commands to the Denon over the next
> > > 15 seconds ramping it louder.
> > > So clunky and I don't know what else to check! HELP!
> > > Also, I don't think it is the internet connection because the ping is
> > > approx. 15ms consistently.
> > > And I don't think it is the GloblaCache hardware because my DirecTV
> > > DVR commands fire with ZERO delay consistently.
>
> > > Any ideas or workarounds??
>
> > > --
> > > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > > To post to this group, send email to commandfusion@googlegroups.com.
> > > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
>
> > --
> > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.-Hide quoted text -
>
> > - Show quoted text -
>
> --
> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> To post to this group, send email to commandfusion@googlegroups.com.
> To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.
Comments
0 comments to "Re: Denon receiver volume ramp??"
Post a Comment