Re: Denon receiver volume ramp??

Tried pronto hex conversion AND learning into iTach learner several
times. Still no go!

On May 5, 1:26 pm, jimi dennison <sjdenni...@hotmail.com> wrote:
> I don't have any experience with that WF2IR device but I have run into
> cruddy volume commands for a denon receiver. Where are you actually
> getting the IR code fromi? Is it a pronto format? If so you might be
> able to learn it in from the actual remote and have better response.
>
> On May 5, 3:05 pm, Brian Lake <brian.e.l...@gmail.com> wrote:
>
>
>
>
>
> > I have a Denon AVR-1507 with no serial port so I have to control via
> > IR.
> > Has anyone done this before? I am sending correct commands to a
> > GlobalCache WF2IR processor and the commands take extremely long to
> > process for some reason! It takes forever to ramp volume!
> > I have messed around with the actual IR code, the repeatcount, and set
> > the repeat delay on the button properties to several values (100, 200,
> > 500ms). When the delay is set to 100ms and I hold the button down for
> > a second, it slowly sends out the commands to the Denon over the next
> > 15 seconds ramping it louder.
> > So clunky and I don't know what else to check! HELP!
> > Also, I don't think it is the internet connection because the ping is
> > approx. 15ms consistently.
> > And I don't think it is the GloblaCache hardware because my DirecTV
> > DVR commands fire with ZERO delay consistently.
>
> > Any ideas or workarounds??
>
> > --
> > You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> > To post to this group, send email to commandfusion@googlegroups.com.
> > To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> > For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.
>
> --
> You received this message because you are subscribed to the Google Groups "CommandFusion" group.
> To post to this group, send email to commandfusion@googlegroups.com.
> To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
> For more options, visit this group athttp://groups.google.com/group/commandfusion?hl=en.- Hide quoted text -
>
> - Show quoted text -

--
You received this message because you are subscribed to the Google Groups "CommandFusion" group.
To post to this group, send email to commandfusion@googlegroups.com.
To unsubscribe from this group, send email to commandfusion+unsubscribe@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/commandfusion?hl=en.